One sheet 5/16 x 3-1/4 x 8-1/4 Float Glass for Scary Sharp System

This is a piece of 5/16 thick x 3-1/4 x 8-1/4 float glass for use as a flat, hard surface in a the Scary Sharp™ sharpening system. Float glass is

This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40. 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets. Float glass will accommodate a half sheet of lapping film. Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.

Taytools Taytool 279182 Single Sheet 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M Lapping Microfinishing Film for Scary Sharp Sharpening

Plate Glass Sharpening System (FINE) 9 7/8” wide x

This is a piece of 5/16 thick x 3-1/4 x 8-1/4 float glass for use as a flat, hard surface in a the Scary Sharp™ sharpening system. Float glass is

One sheet 5/16 x 3-1/4 x 8-1/4 Float Glass for Scary Sharp System

3 Pc Sheet Dead Flat Float Glass & 3M (TM) 7 Sheet Lapping

The Scary Sharp sharpening method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective. Instead of using conventional, more expensive and messy oil, water or diamond stones, the Scary Sharp method uses specialized microfinishing or lapping film that is adhered to a hard, flat substrate. High quality Aluminum Oxide, Silicon Carbide or Diamond films can be procured for a reasonable cost per sheet.

Taytools 773642 Piece of 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System Plus Rubber Stone Holder

10-1/4 x 4-1/4 125 Micron (120 Grit) 3M™ Diamond Flattening Plate Sh — Taylor Toolworks

Supplies — Page 6 — Taylor Toolworks

The Last Scary Sharp Tutorial You Will Need - Ben at Workshop

Supplies — Page 6 — Taylor Toolworks