Set of 9 Japanese Tōgyū oire nomi wood chisels. Laminated carbon steel. Size : 6mm, 9mm, 12mm,15mm, 18mm, 21mm, 24mm, 30mm, 36mm They are very well balanced, with an iron hoop at the end. Made in Japan. Chisels are about 23cm long (9").

Set of 9 Japanese Tōgyū oire nomi wood chisels.
Laminated carbon steel.

Size : 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 30 mm, 36 mm

Chisels are about 23 cm long (9).

  6 mm : 90 grams
  9 mm : 100 grams
12 mm : 110 grams
15 mm : 130 grams
18 mm : 135 grams
21 mm : 150 grams
24 mm : 170 grams
30 mm : 190 grams
36 mm : 210 grams

They are very well balanced, with an iron hoop at the end.

Made in Japan.

Set of 3 original Japanese SENKICHI wood Oire Nomi chisels.

Size : 9 mm, 15 mm, 24 mm

Chisels are about 23 cm long (9).

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of laminated Hitachi Yasugi Steel.

Made in Japan.

SK-11 Chisel and wood plane adjustable sharpening honing guide SSG-70.

Allows both chisels and plan irons to be held at a constant and steady angle when sharpening and honing. Move the guide up and down on the blade to increase or decrease the angle.

Clamping width range : 
- For chisels : 6-36 mm (0.24 - 1.4)
Blade length : 60 mm or more (2.4)
Blade thickness : 8 mm or less (0.3)

- For planes : 36-70 mm (1.4 - 2.8)
Blade length : 80 mm or more (3.1)
Blade thickness : 8 mm or less (0.3)

Weight : 170 grams
Material : Aluminum alloy
Dimensions : 40 x 33 x 108 mm (1.6x1.3x4.3)

Made in Japan.

Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. 

It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.

Size : 120 mm x 120 mm x 70 mm (4.7 x 4.7 x 2.7)
Weight : 165 grams

Made of Oak and carbon steel.

Made in Japan.

Japanese Kiridashi YOSHIHARU carpenter marking carving precision knives.
Available for right or left handed. 

Total length : 12,8 cm (5)
Length of the blade : about 3,7 cm (1.46)
Blade thickness : about 1 mm
Weight : about 20 grams (including sheath)
Blade : Steel
Handle : Brass

Made in Japan.

Japanese double edge Ikeuchi Hamono Hand-forged Kensaki shirabiki spear-point marking knife.

Hand-forged by japanese master blacksmith Ikeuchi.

Size : 15 mm
Length of the blade : about 16 cm
Blade thickness : about 2 mm
Weight : about 50 grams

Blade is made of lamination of blue steel Aogami (HRC 63) and soft steel with hammer eyes.
For right- and left-handed. More precise than a pencil, and it scores the wood.

Made in Japan.

3 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 3 mm 
Weight : 85 grams
Chisel is about 23 cm long (9).

Made in Japan.

Set of 3 Japanese Tōgyū oire nomi wood chisels.
Laminated carbon steel.

Chisels are about 23 cm long (9).

Size : 9 mm, 15 mm, 24 mm
9 mm : 100 grams
15 mm : 130 grams
24 mm : 170 grams

They are very well balanced, with an iron hoop at the end.

Made in Japan.

Set of 11 Japanese SENKICHI wood chisels.

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 3 mm, 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 30 mm, 36 mm, 42 mm.

Chisels are about 23 cm long (9).

  3 mm : 85 grams
  6 mm : 90 grams
  9 mm : 110 grams
12 mm : 120 grams
15 mm : 130 grams
18 mm : 140 grams
21 mm : 150 grams
24 mm : 170 grams
30 mm : 185 grams
36 mm : 210 grams
42 mm : 240 grams

Made in Japan.

Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. 

It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.

Size : 110 mm x 120 mm x 70 mm (4.3 x 4.7 x 2.7)
Weight : 165 grams

Made in Japan.

6 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 6 mm 
Weight : 90 grams
Chisel is about 23 cm long (9).

Made in Japan.

42 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 42 mm 
Weight : 240 grams
Chisel is about 23 cm long (9).

Made in Japan.

30 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 30 mm 
Weight : 185 grams
Chisel is about 23 cm long (9).

Made in Japan.

KAKURI Japanese Wood Chisel Set 6 Pcs, Japanese & Western Mixed Style, Made in JAPAN, Professional Heavy Duty Chisels NOMI with Carrying Case for Woodworking, Red Oak Wood Handle : Tools

Set 9 japanese Tōgyū Chisel wood oire nomi 6 9 15 36mm Made in Japan - Osaka Tools

Japanese Oire Nomi Wood Chisel Sets Next Day Delivery – Rutlands Limited

Set SENKICHI wood Chisel oire nomi Yasugi Steel 9 15 24mm Made Japan - Osaka Tools

Japanese Oire Nomi Chisel Set (3 Piece) - Kakuri Sangyo

KAKURI: Japanese Chisel

Japanese Oire Nomi Chisel Set (3 Piece) - Kakuri Sangyo

Woodworking,Chisels - HIDA TOOL

RANSHOU Japanese Chisel 24mm 1 Oire Nomi, Professional Wood Chisel for Woodworking, Japanese Red Oak Handle, Made in JAPAN : Everything Else

Set 9 japanese Tōgyū Chisel wood oire nomi 6 9 15 36mm Made in Japan - Osaka Tools