THE BATH TIME - The largest collection of Bath Bomb Molds Online – The Bath Time
Our Pixel Heart Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Pixel Heart bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Pixel Heart Bottom Piece
Pixel Heart Top piece
Pixel Heart Bath Bomb Cylinder
Available sizes: 2 | 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Love Potion Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Love Potion bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Love Potion Bottom Piece
Love Potion Top piece
Love Potion Bath Bomb Cylinder
Available sizes: 2 | 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Love Pill Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Love Pill bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Love Pill Bottom Piece
Love Pill Top piece
Love Pill Bath Bomb Cylinder
Available sizes: 2 | 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Winged Heart Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Winged Heart bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Winged Heart Bottom Piece
Winged Heart Top piece
Winged Heart Bath Bomb Cylinder
Available sizes: 2 | 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Boxers Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Boxer's bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Boxers Bottom Piece
Boxers Top piece
Boxers Bath Bomb Cylinder
Available sizes: 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our Rainbow Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Rainbow bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Rainbow Bottom Piece
Rainbow Top piece
Rainbow Bath Bomb Cylinder
Available sizes: 2.5 | 3 | 3.5 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Devil with whichever size “Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Our 3 X SPHERE BATH BOMBS Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Hello SPHERE bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
(3 X SPHERE BATH BOMBS) Bottom Piece
(3 X SPHERE BATH BOMBS) Top piece
(3 X SPHERE BATH BOMBS) Bath Bomb Cylinder
Available sizes: 1.5 | 2 | 2.5 | 3 | 3.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect 3 X Sphere with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT
additional charges so you can enjoy the best quality molds. Colors vary based on our
filament supply and choice, though we generally use black.
All mold designs are tested with different bath bomb recipes before being listed, and each
mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the
dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds
to warp. In addition, make sure not to soak them as the molds can hold water between the
PLA fibers.
Our 16 X SPHERE BATH BOMBS Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Hello SPHERE bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
(16 X SPHERE BATH BOMBS) Bottom Piece
(16 X SPHERE BATH BOMBS) Top piece
(16 X SPHERE BATH BOMBS) Bath Bomb Cylinder
Available sizes: 1 | 1.25 | 1.5 (of each sphere)
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect 9 X SPHERE with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT
additional charges so you can enjoy the best quality molds. Colors vary based on our
filament supply and choice, though we generally use black.
All mold designs are tested with different bath bomb recipes before being listed, and each
mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the
dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds
to warp. In addition, make sure not to soak them as the molds can hold water between the
PLA fibers.
Our PAW Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable PAW bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
PAW Bottom Piece
PAW Top piece
PAW Bath Bomb Cylinder
Available sizes: 2.5 | 3 | 3.5 | 4
HOW TO USE
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Paw with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Embed maker bath bomb mold. 3D printed, lets you make 25 embeds of half inch sized embeds
in ONE batch 3 Piece Mold Set. Includes 1 top, 1 bottom and 1 sleeve/cylinder.
SPECS:
Mold Size of 5x5 = makes 25 embeds at 0.5” * 0.5” approx.
The thickness and weight of each embed will vary depending on how much mixture you use.
instead of ice trays, there is a better way to do this, we created this tool to help my bath bomb production, hopefully, it can help you too!
All my molds are printed in high-quality PLA+, ensuring robust bath bomb molds.
The mold contains 3 pieces: Base, Sleeve, and Plunger. The Colour may vary, but I usually print it black.
HOW TO USE:
Place sleeve on base. Add your embed mixture. Place the top inside the sleeve, and then simply press down hard and unmold.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
When you first started making bath bombs you probably started with the classic round
shape.
I think most of us start there.
It is, after all, iconic. And instantly recognizable. And arguably essential to the bath bomb game.
For this, we have Classic Bomb Bath Bomb Mold.
It is printed using 3D printing technology. The sandwich-type mold makes it easy to press
adorable and precise Classic Bomb bath bombs quickly and easily!
SPECS:
Classic Bomb Bottom Piece
Classic Bomb Top Plunger
Classic Bomb Bath Bomb Cylinder
Available sizes: 1.25 | 1.50 | 1.75 | 2 | 2.25 | 2.5 | 2.75 | 3 | 3.25 | 3.5 |
3.75 | 4 | 4.5
HOW TO USE:
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Classic Sphere with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT
additional charges so you can enjoy the best quality molds. Colors vary based on our
filament supply and choice, though we generally use black.
All mold designs are tested with different bath bomb recipes before being listed, and each
mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the
dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds
to warp. In addition, make sure not to soak them as the molds can hold water between the
PLA fibers.
Our 3D ROSE Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable 3D ROSE bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
3D ROSE Bottom Piece
3D ROSE Top piece
3D ROSE Bath Bomb Cylinder
Available sizes: 2.5 | 3 | 3.5 | 4
HOW TO USE
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect 3D ROSE with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT
additional charges so you can enjoy the best quality molds. Colors vary based on our
filament supply and choice, though we generally use black.
All mold designs are tested with different bath bomb recipes before being listed, and each
mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the
dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds
to warp. In addition, make sure not to soak them as the molds can hold water between the
PLA fibers.
-
3D CLOUD BATH BOMB Mold, 3d Printed Diy Bath Bomb Molds for Boys & Girls, Bath Bomb Making Kit, Fun Shaped Mold, Mom Gift for Children15 Jun 2024
-
DIY Bath Bomb Recipes + Tutorial (Great Gifts!) - Jennifer Maker15 Jun 2024
-
DIY Macaron Bath Bomb Kit Endless Creativity Craft Kids Childrens Gift15 Jun 2024
-
Homemade Bath Bombs - A Beautiful Mess15 Jun 2024
-
How To Make DIY Bath Bombs With A Toy Hidden Inside15 Jun 2024
-
LUSH-inspired Homemade Bath Bombs Club Chica Circle - where crafty is contagious15 Jun 2024
-
How To Make Bath Bombs (Step-by-Step Guide) - Parade15 Jun 2024
-
Easy Essential Oils Mini Bath Bomb Favor Trios — Wine & Sprinkles15 Jun 2024
-
DIY Rainbow Bath Bomb Recipe - Made In A Pinch15 Jun 2024
-
I've been experimenting with 3D printing bath bomb molds recently. (Post your mold ideas and I'll see if I can design them :D) : r/BathBomb15 Jun 2024
-
What do I need to start Paper Quilling with Minimum Budget15 Jun 2024
-
1pc Valentine's Day Pink Pom Pom Garland, Elastic Cord For Diy Crafting Clothing & Accessories, Gift & Home Decor15 Jun 2024
-
Sky Serpent on X: Twitter friends, I've finally bought some Tamiya Extra Thin to make some sprue goo - how much sprue do I need to add? / X15 Jun 2024
-
ProCase Earring Holder Organizer Box Valentine's Day Gifts, Clear Acrylic Jewelry Box for Women, Stackable Large Jewelry Storage Case with15 Jun 2024
-
How To Tighten A Wig That Is Too Big?15 Jun 2024
-
Rick & Morty Rick & Morty Space Rush Medium Tray Rolling Papers & Supplies15 Jun 2024
-
Create this Book 3 by @MoriahElizabeth15 Jun 2024
-
MEEDEE Red Velvet Ribbon 1.5 Inch Velvet Wired Ribbon 25 Yards Dark Red Velvet Ribbon Spool Velvet Christmas Ribbon Red Velvet Wired Ribbon for15 Jun 2024
-
Ring Size Adjuster for Loose Rings Invisible Ring Guard Clip15 Jun 2024
-
Excedrin Migraine Coated Caplets (300 ct.)15 Jun 2024