Gonna fill these voids with some West System epoxy, with a drop or two of Transtint dark walnut dye. Here goes nothin! #wood …

Mar 23, 2020 - Gonna fill these voids with some West System epoxy, with a drop or two of Transtint dark walnut dye. Here goes nothin! #wood #woodwork #woodworking #woodshop #woodworker #handcrafted #handmade #homegoods #madeinwisconsin #wisconsinmade #eauclairewi #wisconsin

TransTints Liquid Dye - Printable Tip Sheet

Fixing Knots and Voids with Epoxy — Penalty Box Woodshop

How To Fill Wood Voids with Epoxy

Color your epoxy for resins, filler and much more! Simply add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

System Three Black Epoxy Paste Pigment, 2 oz.

Finish Coatings WEST SYSTEM Epoxy

TransTint - Dark Walnut Transtint Alcohol/Water Soluble Dye 2 oz

Adding Dye to Epoxy

Additives & Pigments

How To Fill Wood Voids with Epoxy

SculpWood Putty is a 2-component solvent free knead able epoxy. It is moldable carvable lightweight strong and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint screws and nails.

System Three 1600K20 SculpWood Putty Kit 0.5 Gallon Brown

TransTint - Dark Walnut Transtint Alcohol/Water Soluble Dye 2 oz

Olympic ELITE: A premium wood stain and sealant. This water based, semi-transparent wood stain adds color while still allowing the wood grain and texture to show. This super-premium exterior wood stain is formulated to protect and enhance the natural look of wood while providing protection and beauty through all seasons and provides a powerful mold, mildew and algae-resistant finish to your deck, fence. All backed by a lifetime guarantee.

Olympic Elite 1-gal. Black Walnut EST709 Semi-Transparent Exterior Stain and Sealant in One Low VOC

Color your epoxy for resins, filler and much more! Simply add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use - only add hardener when you are ready to use.

System Three Blue Epoxy Paste Pigment, 2 oz.