Food-Safe Oils. Which Type Should You Be Using? - Earlywood

By A Mystery Man Writer
Last updated 30 May 2024
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
 “What is the best oil to treat wooden utensils and cutting boards with?” It’s a question we get every time we are out selling Earlywood products and it’s easy to see where the confusion comes from. There are old-fashioned treatments and modern oil blends that all claim to be the best way to preserve wood used in the kitchen.  So let’s take a look at your options for treating wood, and clear up the confusion. There are essentially two kinds of oil used for treating wood, oils that harden, and oils that don’t harden. Oils that harden, including polyurethane and varnish are basically what you’ve got on your furniture. Based on smell alone, it should be obvious why they are not good for anything that comes into contact with food, yet we do occasionally see people use it. It creates
Earlywood is a top online maker of heirloom quality wooden kitchen utensils. Handcrafted in the USA, our wooden cooking utensils are functional and built to last generations.. Choose from our variety of rolling pins, spoons, spatulas, tongs, spreaders, and servers that are truly versatile yet pretty enough to be displa
 “What is the best oil to treat wooden utensils and cutting boards with?” It’s a question we get every time we are out selling Earlywood products and it’s easy to see where the confusion comes from. There are old-fashioned treatments and modern oil blends that all claim to be the best way to preserve wood used in the kitchen.  So let’s take a look at your options for treating wood, and clear up the confusion. There are essentially two kinds of oil used for treating wood, oils that harden, and oils that don’t harden. Oils that harden, including polyurethane and varnish are basically what you’ve got on your furniture. Based on smell alone, it should be obvious why they are not good for anything that comes into contact with food, yet we do occasionally see people use it. It creates a shell around the utensil that, with use, will eventually crack and chip off in your food. Not good, friends. Not recommended. Oils that don’t harden, include food-based oils, linseed oil, tung oil, and petroleum-based oils. These all offer safer protection, but they’re not all equal. Food based oils like olive, corn, vegetable, and canola oils will never dry and chip off into your food like hardening oils, but they can discolor your utensils, thicken, and go rancid, giving your spoons and cutting boards a rotten smell. Have you ever see an old cutting board that someone is selling at a garage sale that is yellow and sticky on the surface? It is that way because they most likely treated the board for years with one of these food-based oils. These oils are especially troublesome when used on counter top cutting boards that don’t get a thorough washing very often. An exception to the typical food-based oils, is walnut oil. It’s widely recommended because it doesn’t go rancid. It dries, unlike the other oils in your kitchen. However, it can still get a tacky feel. If you’re a believer in walnut oil, be sure to apply it only to utensils you use – and wash – often. That should help keep it from developing a thick, sticky coating. Another option is tung oil. It does a good job. It will dry, which will keep it from going rancid, and it shouldn’t create a sticky buildup, but to get a proper coating you’ll need to spend 7-10 days coating and drying. We should also mention beeswax. It’s a safe option. It will give you a shiny smooth surface and be essentially waterproof. This sounds like a good thing, but the problem is that it is hard at room temperature, and as soon as you dip that treated spoon into a hot dish, the wax immediately melts into your food, thus losing most of its protection. Beeswax is often blended with mineral or other oils and is dubbed as “spoon oil”. We have found that the addition of wax to mineral oil only thickens the oil, makes it harder to apply and restricts the depth to which it can soak in. Therefore, we’re not huge fans. So, we’re down to petroleum based oils, and within that category is our recommendation for treating your utensils, mineral oil. Mineral oil gets a bad rap from time to time because it is petroleum based. If you are anti petroleum products, that’s your thing and that’s just fine. We’re not here to convince you otherwise, we’re just here to tell you what works best for oiling wooden spoons!   Mineral oil has a lot of great qualities when it comes to treating wood that will be in contact with food. Here are a few of its benefits:  - It’s 100% food safe - It quickly penetrates the tight grain of the hardest hardwoods - It will never go rancid like food-based oils - It never dries or leaves a sticky residue - It is odorless - It has a decades-long shelf life - It enhances but does not change the natural color of the wood - It can be used for utensils, cutting boards, knife handles (even if they are plastic)! We specifically recommend a low-viscosity mineral oil for the task. Viscosity refers to the thickness of a liquid. On one end of the spectrum you have high viscosity liquids like hydraulic fluid and the other end of the spectrum you have very low viscosity oils like WD-40. The mineral oil that we use and sell on our website is lighter than water and penetrates deeper into the wood than thicker oils. We add a little lemon peel oil, which has antimicrobial properties and you get to enjoy the refreshing lemon scent while you oil your spoons. We hope that clears things up for you a bit. Now, go oil your utensils and cook something great!
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Earlywood Handcrafted Utensils
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Types of Food-Safe Cutting Board Oil to Use on Your Boards and in
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Pin on Woodworking Projects
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Earlywood Wood Bowl Oiling Tutorial
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Facts About Food-Safe Finishes
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Earlywood wholesale products
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Earlywood The Essentials Set
THIS OIL WORKS ON ALMOST ANYTHING WOOD. Use this food grade mineral oil for wood blended with lemon peel oil to freshen up the surface on your wood
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Earlywood 4.5 oz. Lemon Mineral Oil for Cutting Boards and Wooden Kitchen Utensils and Spoons; Food Safe, Clear, Lemon-scented mineral oil
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Food Safe Wood Oil
Food Grade Wood Oil for Butcher Blocks and Utensils, Now you can buy the Wood Wax and Wood Oil as a set and save!, Our wooden spoon oil is a food-safe
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
butcher block oil
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
Earlywood Flat Saute Set
Food Grade Wood Oil for Butcher Blocks and Utensils, Now you can buy the Wood Wax and Wood Oil as a set and save!, Our wooden spoon oil is a food-safe
Food-Safe Oils. Which Type Should You Be Using? - Earlywood
butcher block oil

© 2014-2024 academicdiary.news. All rights reserved.