Underwater Servo SER-20XX

Our newest, most reliable underwater servos! With a robust machined acetal case, these waterproof servos are rated to 200 meters. In addition to two pre-assembled and pre-tested models, a kit option allows you to tailor the servo to your specific needs while saving money. SER-2010, $395: 29.0 kgf-cm of torque with a default travel range of ± 70 degrees. Cobalt 3-pin bulkhead connector included. SER-2020, $495: 34.0 kgf-cm of torque with a default travel range of ± 230 degrees. Programmable for up to ± 3.5 full turns of rotation with position control or continuous rotation with speed control. Brushless motor and magnetic encoder. Cobalt 3-pin bulkhead connector included. SER-2000, $215: low-cost kit option that allows users to select and install their own standard-sized R/C servo inside the enclosure – including PWM, CAN, or serial servos – as well as their choice of either a Cobalt bulkhead connector or a cable with M10 penetrator. Output shaft is a 6-mm titanium D-shaft. Does not include servo arm. You will need a regular Cobalt 3-pin cable (NOT a 3-pin Power cable) to connect to these servos. WARNING: These servos do not have internal protection against overheating or overvoltage. They can be damaged or destroyed by: driving the servo against a hard stop for more than 5-10 seconds running the servo at high torque continuously applying more than the recommended voltage to the servoUsers should design their electrical and mechanical systems to avoid these scenarios. See the Dowloads tab for the datasheet and assembly instructions for the SER-2000. SKUs: SER-2010 SER-2020 SER-2000
Our newest, most reliable underwater servos! With a robust machined acetal case, these waterproof servos are rated to 200 meters. In addition to two pre-assembled and pre-tested models, a kit option allows you to tailor the servo to your specific needs while saving money. SER-2010, $395: 29.0 kgf-cm of torque with a default travel range of ± 70 degrees. Cobalt 3-pin bulkhead connector included. SER-2020, $495: 34.0 kgf-cm of torque with a default travel range of ± 230 degrees. Programmable for up to ± 3.5 full turns of rotation with position control or continuous rotation with speed control. Brushless motor and magnetic encoder. Cobalt 3-pin bulkhead connector included. SER-2000, $215: low-cost kit option that allows users to select and install their own standard-sized R/C servo inside the enclosure – including PWM, CAN, or serial servos – as well as their choice of either a Cobalt bulkhead connector or a cable with M10 penetrator. Output shaft is a 6-mm titanium D-shaft. Does not include servo arm. You will need a regular Cobalt 3-pin cable (NOT a 3-pin Power cable) to connect to these servos. WARNING: These servos do not have internal protection against overheating or overvoltage. They can be damaged or destroyed by: driving the servo against a hard stop for more than 5-10 seconds running the servo at high torque continuously applying more than the recommended voltage to the servoUsers should design their electrical and mechanical systems to avoid these scenarios. See the Dowloads tab for the datasheet and assembly instructions for the SER-2000. SKUs: SER-2010 SER-2020 SER-2000

Ping360 Scanning Imaging Sonar - ROV Africa

Underwater Motor / Thruster MTR-2000 - ROV Africa

The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects,

Newton Subsea Gripper

Waterproof Servo SER-110X – Sea Outpost

The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects,

Newton Subsea Gripper

R4版】Lumen海中ライト4灯1連 − Lumen Subsea Light (Pre-C

Waterproof Servo SER-110X – Sea Outpost

水中ドローン社公式ストア

Waterproof Servo SER-110X – Sea Outpost

Power HD T5R SERVO 1/16 METAL Gear Waterproof Traxxas 2080X Upgrade