Arcticlean Plastic seal Trim Coat, 30ml – SWEDISHGLOSS

Arcticlean ceramic Trim coat is an extremely durable protection that also restores worn and sun-bleached plastic to its original condition. There have always been products to treat faded or worn plastic, but then usually oil-based, which gives a limited durability, Trim coat in most cases gives a permanent original-lik
Arcticlean ceramic Trim coat is an extremely durable protection that also restores worn and sun-bleached plastic to its original condition. There have always been products to treat faded or worn plastic, but then usually oil-based, which gives a limited durability, Trim coat in most cases gives a permanent original-like surface with an extreme water and dirt repellent effect. Faded bumpers, side mirrors, the holders for the wiper blades and other plastic will be like new again, you can also use Trim coat on your lights, both as a preventive protection and as a "restorer". Trim coat also withstands high heat so you can use it on covers under the bonnet. However, it does not fix ALL problems - e.g. faded red plastic that has turned white. For an application, we recommend that you buy to: 1 pc  Application sponge - coating 1 all-round drying cloth Characteristics: Ceramic sealing of Plastic Size 30 ml SWEDISHGLOSS tip: Highly recommend using an IPA (Isopropranol based) cleaner before applying ceramic lacquer sealer. Spray in the microfiber cloth or directly on the panel to be cleaned and dry until no grease remains. Replace the microfiber cloth if it becomes saturated or too damp. Apple location of product: Shake the bottle and drop Trim Coat onto the supplied application sponge or other suitable sponge/cloth Apply the agent. Remember that soft plastic absorbs more coating than hard plastic. After approx. 1 minute. you can wipe off the excess with a microfiber cloth. Avoid exposing the treated surfaces to moisture/dirt during the first 6 hours after application. It is possible to speed up the curing time with infrared heat. Warning information: H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H373 May cause damage to organs through prolonged or repeated exposure. P102 Keep out of the reach of children. P233 Keep container tightly closed P261 Avoid breathing vapour. P305+P351+P338 IF IN EYES: Rinse cautiously with water for at least 15 minutes. Remove any contact lenses if possible. Continue rinsing.
Arcticlean ceramic Trim coat is an extremely durable protection that also restores worn and sun-bleached plastic to its original condition. There have always been products to treat faded or worn plastic, but then usually oil-based, which gives a limited durability, Trim coat in most cases gives a permanent original-like surface with an extreme water and dirt repellent effect. Faded bumpers, side mirrors, the holders for the wiper blades and other plastic will be like new again, you can also use Trim coat on your lights, both as a preventive protection and as a restorer. Trim coat also withstands high heat so you can use it on covers under the bonnet. However, it does not fix ALL problems - e.g. faded red plastic that has turned white. For an application, we recommend that you buy to: 1 pc  Application sponge - coating 1 all-round drying cloth Characteristics: Ceramic sealing of Plastic Size 30 ml SWEDISHGLOSS tip: Highly recommend using an IPA (Isopropranol based) cleaner before applying ceramic lacquer sealer. Spray in the microfiber cloth or directly on the panel to be cleaned and dry until no grease remains. Replace the microfiber cloth if it becomes saturated or too damp. Apple location of product: Shake the bottle and drop Trim Coat onto the supplied application sponge or other suitable sponge/cloth Apply the agent. Remember that soft plastic absorbs more coating than hard plastic. After approx. 1 minute. you can wipe off the excess with a microfiber cloth. Avoid exposing the treated surfaces to moisture/dirt during the first 6 hours after application. It is possible to speed up the curing time with infrared heat. Warning information: H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H373 May cause damage to organs through prolonged or repeated exposure. P102 Keep out of the reach of children. P233 Keep container tightly closed P261 Avoid breathing vapour. P305+P351+P338 IF IN EYES: Rinse cautiously with water for at least 15 minutes. Remove any contact lenses if possible. Continue rinsing.

Arcticlean ceramic Trim coat is an extremely durable protection that also restores worn and sun-bleached plastic to its original condition. There have

Arcticlean Plastic seal Trim Coat, 30ml

Two part cleaner dissolves old thermal paste on heat sinks and processors. One 30 ml bottle of thermal material remover and one 30 ml bottle of

Arctic Silver ArctiClean

Nu Calgons Easy Seal Ultimate for Small Systems with UV Dye Treats Systems up to 2 Tons. number 4050-21. The EasySeal line has proven to be the number one trusted leak sealant brand for years, with millions of leaks sealed.

Nu-Calgon Leak Sealant, for Up to 2 Tons Systems 4050-21

Meguiar's Application Sponge Tire Dressing Applicator Pad – SWEDISHGLOSS

Arcticlean Keramisk plastbehandling Trim coat, 30ml - Jim´s garage - bilvård på nätet –

Arctic Silver Arcticlean Thermal Cooling Material Remover and Surface Purifier (ACN-60ML) : Automotive

ArctiClean Kit 1 & 2 Thermal Paste Compound Remover + Arctic Silver 5 Thermal Compound Paste 3.5g + Lansh Tool : Electronics

ArctiClean 60ml Kit (includes 30ml ArctiClean 1 and 30ml ArctiClean 2) : Electronics

Arcticlean Lacquer sealing Base Coat, 30ml – SWEDISHGLOSS

Arctic Silver Arcticlean Thermal Cooling Material Remover and Surface Purifier (ACN-60ML) : Automotive

2-step cleaning process Removes existing thermal grease or pads Prepares surface for fresh applications

Arctic Silver Arcticlean Thermal Cooling Material Remover and Surface Purifier (ACN-60ML)

Arcticlean Plastic seal Trim Coat, 30ml – SWEDISHGLOSS