Crystalac Polyurethane Topcoat - Clear Gloss Finish 1 Quart

Crystalac Polyurethane Topcoat - Clear Gloss Finish 1 Quart. Extreme Protection Polyurethane is a water based interior NON-YELLOWING, Environmentally Sa

CrystaLac^® Extreme Protection Polyurethane Topcoat

Extreme Protection for Extreme Demands

Extreme Protection Polyurethane is a water based interior NON-YELLOWING, Environmentally Safe Top Coat that is Super Hard, Super Clear and Super Easy to Use.

FEATURES:

• Scratch, Chemical, and Water Resistant
• Self-Levels
• Low Odor, Low V.O.C
• Added UV stabilizers will keep dyes and stains brilliant and will help protect colors from fading
• Dries crystal clear even over white finishes. Excellent for use as a chalk paint sealer.
• CrystaLac Top Coats can be used over thoroughly dried oil or water-based stains, shellac, lacquer, Polyurethane or Acrylic.

APPLICATION:

• Can be applied by either brushing or spraying (gravity feed or HVLP sprayer)
• It is not necessary to sand between each top-coat layer. (All CrystaLac Top Coats will bond to the prior coat.)
• If recoating over an old finish, scuff sand first and remove any surface contaminants such as dirt, waxes or polishes.
• Usually 3 to 5 coats are sufficient to produce a beautiful, protective finish. Use more if desired.
• Dry time is usually 30 min to 1 hour. Allow 2 to 4 hours before recoating.
• Do not use stearated sandpaper or tack cloths. Do Not freeze. Do Not apply below 60 degrees.
• Do not thin or clean with lacquer solvents or mineral spirits. Use soap and water for clean-up.

Coverage is approximately 400 to 500 sq. ft. per gallon.

CAUTION:

Keep out of reach of children! Do not ingest. Avoid contact with skin and eyes. Do not breathe vapors. Use with adequate ventilation. When spraying or sanding, use an OSHA approved mask. V.O.C. is less than 1.4 lbs. per gallon.

DISPOSAL:

Consult your local sanitation department. Do not dump on the ground.

WARNING: CrystaLac Company has chosen to provide a warning based on its knowledge about the presence of one or more listed chemicals without attempting to evaluate the level of exposure. Products marketed or sold by CrystaLac Company may contain listed chemicals at levels that are below the Proposition 65 level of concern, or could even be zero. However, out of an abundance of caution, CrystaLac Company has elected to place the Proposition 65 warning notification on all its products. Please see our Prop 65 for specifics on these products.

CrystaLac Brite Tone High Solids Polyurethane Instrument Finish 16 oz Pint (Clear Satin)

CrystaLac Extreme Protection Polyurethane: Interior Top Coat Solution

CRYSTALAC PolyOxide Wood Floor Finish, Quart / Semi Gloss

CRYSTALAC Super Premium Acrylic / Urethane Top Coat Mini 1/2 Pint / Gloss

Crystalac Extreme Protection POLYURETHANE 1 Quart Matte, Satin or Gloss Finishnon-yellowing water Based

Minwax Polycrylic Clear Gloss Water-based Polyurethane (1-quart) in the Sealers department at

CrystaLac Brite Tone Coating on Polymer Clay - The Blue Bottle Tree

Colored Polyurethane – The CrystaLac Store

CrystaLac Surface Conditioner - Quart

CrystaLac 3 Piece Instrument Finishing Kit (Gloss)

CrystaLac - CrabCoat Exterior Marine Finish - Clear - Gloss - Quart

Crystalac Extreme Protection Polyurethane 8oz Matte Satin Gloss Non Yellowing UV Resistant

Extreme Protection Polyurethane – The CrystaLac Store