Tool Grip and Tether Attachment Point

The Tool Grip and Tether Attachment Point installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job.

The Squids 3745 Tool Grip and Tether Attachment Point (2-pack) installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screwdrivers and nut drivers. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.</p>

STRAIGHTFORWARD INSTALLATION</h3>

Designed in two pieces, this tool attachment features an end cap and a rubber sleeve. To install, slide a screwdriver or nut driver into the rubber sleeve and plug the end cap’s pegs into the reinforced holes of the rubber sleeve. The sleeve features a textured rubber and is ergonomically designed to cover the entire tool handle—providing greater comfort, torque and an enhanced grip. The end cap features a swiveling connection point for tool tethering, which helps prevent tangles and binding when used with a tool lanyard.</p>

Built-in trim lines on the sleeve allows for this tool attachment to be customized to fit varying driver lengths. A flexible opening on the bottom of the rubber sleeve expands to allow for larger nut drivers to be installed. Unlike competition, this tool attachment grip can be installed, removed and re-installed multiple times. The swiveling tool attachment portion does not interfere with proper holstering or prevent a user from pressing down on the end of the tool to gain leverage when using.</p>

TESTED TO BE TRUSTED</h3>

These tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 1lb // 0.45kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.</p>

Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.</p>

This tool attachment is compatible with screwdrivers or nut drivers with handles ranging from 1in // 2.5cm to 1.28in // 3.2cm in diameter and a handle height of 4.5in // 11.4cm</p>

Knipex Tools is the world’s largest manufacturer of professional pliers since 1882. KNIPEX pliers, cutters, insulated tools and other products have been the tools of choice for professional tradesmen and end users who are serious about their hand tools and demand industrial quality. Knipex Tools are made from start to finish utilizing the highest quality materials.

KNIPEX, 74 02 200 T BKA, High Leverage Diagonal Cutters

3M™ DBI-SALA® Hard Hat Tether 1500178 10 EA/PACK

Ergodyne Squids 3178 2 Locking Aerial Bucket Hook with Tethering Point

GRIPPS Tool Tether Anchors - Holsters, Gloves, Wristbands & More – GRIPPS Global

Loop Wire Tool Attachment, Tool Tethering

Ergodyne Squids 3745 Tool Tethering Tool Grip Attachment : : DIY & Tools

Aerial Bucket Hook

Always keep your tools secure with this shock-absorbing tool tether lanyard. It features a single-action carabiner on one end and a loop with a cord lock toggle stopper on the other. This easy-to-use mechanism allows you to attach your lanyard to a workstation, belt, or any other anchor point as needed, so that you can keep your tools close at hand at all times.

Hi Vis Shock Absorbing Tool Tether Lanyard with Carabiner by JORESTECH

Ergodyne Squids 3785 Split Ring Tool Attachment (10-pack) - - 1 in (2.5 cm) - Jendco Safety Supply