Wall Thimble for 6 Inner Diameter Chimney Pipe – AllFuel HST

AllFuel HST Flat Roof Flashing for 6-Inch Inner Diameter Chimney Pipe

AllFuel HST 11-Inch Square Ceiling Support Box for 6-Inch Inner Diameter Chimney Pipe

The Flat Top Chimney Cap tops off the chimney system to keep rain and snow, debris, and animals from getting inside the chimney. Our chimney cap uses the same twist lock connection as the rest of our products to allow for easy removal for cleaning. The cap is made of 304 stainless steel for superior corrosion protection.

AllFuel HST Chimney Cap with Flat Top for 6 Chimney Pipe

Made of 304 stainless steel for superior corrosion resistance. 0.019-in thick inner and outer walls (17% thicker than our competition). High density 1.18-in thick ceramic fiber blanket insulation ensures no hot spots and no settling of insulation. Precision engineered twist lock connection for easy no tools assembly. Locking band included for a water tight seal between components.

AllFuel HST 6 in. x 9 in. Double Wall Chimney Pipe

The storm collar works together with the Roof Flashing to provide a waterproof seal where the chimney passes through the roof. The storm collar is installed directly above the flashing and must be sealed to the chimney pipe using high-temperature silicone sealant (RTV 500°F or better), sold separately. Made of 304 stainless steel for superior corrosion protection. Made of 304 stainless steel Made for 6 in.

Allfuelhst Storm Collar for 6 Chimney Pipe

DuraVent DVL 5 to 6 Diameter Increaser for Double Wall Black

Shasta Vent Class A, All Fuel Wall Thimble & Finishing Collar

6 Inner Diameter x 18 Long Double Wall Chimney Pipe – AllFuel HST

The 15° Elbow Kit for 8 in. I.D. chimney pipe is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes 2 lengths of pipe between the elbows a second Elbow Strap (sold separately) is required.

AllFuel HST 15 Degree Elbow Kit for 6-Inch Inner Diameter Chimney Pipe

Stove Pipe Adapters For DuraTech & DuraPlus Chimney Pipe

The 6 Class-A Wall Thimble is used for through-the-wall chimney installations. It protects the wall as the chimney passes safely through to the outside and provides a finished look to the framed opening on the inside. The Wall Thimble can adjust to accommodate walls from 6 to 10 inches thick.

Allfuelhst Wall Thimble for 6 inch Diameter Chimney Pipe