PTO Link® Compact System - Replacement Locking Pin & Safety Bolt
By A Mystery Man Writer
Last updated 01 Jun 2024
Product Features: Locking Pin-Compact (replacement) Spring Loaded Stainless Steel For Use with PTO Link® Compact - Tractor (Female) Coupler Dimensions: 2”L x 0.75”W) (3/8” Threads) Weight: Locking Pin-Compact Weight: 2.3 oz NOTE: When replacing, use Loctite® Threadlocker 271 Red (INCLUDED) on housing threads and wrench tight PTO Link® Compact - Safety Bolt The PTO Link® Safety Bolt, also known as the Quick-Release Detent Clevis Pin, is essentially a cotterless Clevis Pin that features a ball detent that depresses and springs up to hold the Clevis Pin into place. This one-piece locking clevis pin is fast and secure. It also acts as an alignment pin for the two mating couplers of the PTO Link® system and further secures the couplers (much like a deadbolt lock) to withstand most high torque scenarios or instances wherein reverse torque on the PTO shaft could be experienced (e.g., while using flex-wing mowers, heavy-duty shredders, tillers, augers, stump grinders, PTO auto-brakes or reverse safety switches, etc.). Since these high torque or reverse torque scenarios on the PTO are often unforeseen, it is therefore required always to install the safety bolt while using the PTO Link® system. The PTO Link® system already comes with a replaceable spring-loaded locking pin (Compact Locking Pin) affixed onto the tractor (female) coupler that engages with the implement (male) coupler for the initial connection. The safety bolt provides the following benefits: Snugly aligns and secures the male and female couplers of the PTO Link® system together to minimize vibration and wear to your driveline; Balances and absorbs excess torque across the entire coupler diameter of the PTO Link® system, providing added strength to your PTO connection during high torque or reverse torque scenarios. Provides enhanced safety, protection, and durability to your PTO Link® system. The Safety Bolt is a Grade 8 bolt featuring a stainless steel, spring-loaded ball detent that functions as an easy insertion and quick-release mechanism. The ball detent retracts when inserted, springs back up when installed through the joined couplers, and locks into place! Installation instructions: Before installing the Safety Bolt, first install the PTO Link® couplers separately on the tractor's PTO (female coupler) and the implement shaft receiver (male coupler). Next, couple the implement and tractor couplers together, aligning the implement coupler's studs into the tractor coupler's openings. Then slightly rotate the implement coupler counter-clockwise (or the tractor coupler clockwise) until the locking pin has locked in place, indicated by an audible "click." Now, note the aligned 1⁄2" opening through both couplers of the fully locked PTO Link® system, positioned across the coupler, opposite the locking pin. To install the safety bolt: Place the chamfered edge of the pin into the 1⁄2" opening on either the tractor or the implement coupler. Push the head of the pin through the aligned 1⁄2" openings on both couplers. The ball detent of the safety bolt will release its internal spring and secure both couplers together. To uninstall the safety bolt: Push the chamfered edge of the safety bolt out. Pull the head of the emerging safety bolt through the couplers, releasing the pin. Once accustomed to the safety bolt, your process to reinstall and uninstall will take only a few seconds. When the PTO Link® system is not in use, affix the safety bolt through the 1⁄2" opening on the tractor coupler for convenient storage. Dimensions: (1.225" L x 0.630" W) Weight: 1.5 oz
Product Features: Locking Pin-Compact (replacement) Spring Loaded Stainless Steel For Use with PTO Link® Compact - Tractor (Female) Coupler Dimensions: 2”L x 0.75”W) (3/8” Threads) Weight: Locking Pin-Compact Weight: 2.3 oz NOTE: When replacing, use Loctite® Threadlocker 271 Red (INCLUDED) on housing threads and wrench tight PTO Link® Compact - Safety Bolt The PTO Link® Safety Bolt, also known as the Quick-Release Detent Clevis Pin, is essentially a cotterless Clevis Pin that features a ball detent that depresses and springs up to hold the Clevis Pin into place. This one-piece locking clevis pin is fast and secure. It also acts as an alignment pin for the two mating couplers of the PTO Link® system and further secures the couplers (much like a deadbolt lock) to withstand most high torque scenarios or instances wherein reverse torque on the PTO shaft could be experienced (e.g., while using flex-wing mowers, heavy-duty shredders, tillers, augers, stump grinders, PTO auto-brakes or reverse safety switches, etc.). Since these high torque or reverse torque scenarios on the PTO are often unforeseen, it is therefore required always to install the safety bolt while using the PTO Link® system. The PTO Link® system already comes with a replaceable spring-loaded locking pin (Compact Locking Pin) affixed onto the tractor (female) coupler that engages with the implement (male) coupler for the initial connection. The safety bolt provides the following benefits: Snugly aligns and secures the male and female couplers of the PTO Link® system together to minimize vibration and wear to your driveline; Balances and absorbs excess torque across the entire coupler diameter of the PTO Link® system, providing added strength to your PTO connection during high torque or reverse torque scenarios. Provides enhanced safety, protection, and durability to your PTO Link® system. The Safety Bolt is a Grade 8 bolt featuring a stainless steel, spring-loaded ball detent that functions as an easy insertion and quick-release mechanism. The ball detent retracts when inserted, springs back up when installed through the joined couplers, and locks into place! Installation instructions: Before installing the Safety Bolt, first install the PTO Link® couplers separately on the tractor's PTO (female coupler) and the implement shaft receiver (male coupler). Next, couple the implement and tractor couplers together, aligning the implement coupler's studs into the tractor coupler's openings. Then slightly rotate the implement coupler counter-clockwise (or the tractor coupler clockwise) until the locking pin has locked in place, indicated by an audible click. Now, note the aligned 1⁄2 opening through both couplers of the fully locked PTO Link® system, positioned across the coupler, opposite the locking pin. To install the safety bolt: Place the chamfered edge of the pin into the 1⁄2 opening on either the tractor or the implement coupler. Push the head of the pin through the aligned 1⁄2 openings on both couplers. The ball detent of the safety bolt will release its internal spring and secure both couplers together. To uninstall the safety bolt: Push the chamfered edge of the safety bolt out. Pull the head of the emerging safety bolt through the couplers, releasing the pin. Once accustomed to the safety bolt, your process to reinstall and uninstall will take only a few seconds. When the PTO Link® system is not in use, affix the safety bolt through the 1⁄2 opening on the tractor coupler for convenient storage. Dimensions: (1.225 L x 0.630 W) Weight: 1.5 oz
Product Features: Locking Pin-Compact (replacement) Spring Loaded Stainless Steel For Use with PTO Link® Compact - Tractor (Female) Coupler Dimensions: 2”L x 0.75”W) (3/8” Threads) Weight: Locking Pin-Compact Weight: 2.3 oz NOTE: When replacing, use Loctite® Threadlocker 271 Red (INCLUDED) on housing threads and wrench tight PTO Link® Compact - Safety Bolt The PTO Link® Safety Bolt, also known as the Quick-Release Detent Clevis Pin, is essentially a cotterless Clevis Pin that features a ball detent that depresses and springs up to hold the Clevis Pin into place. This one-piece locking clevis pin is fast and secure. It also acts as an alignment pin for the two mating couplers of the PTO Link® system and further secures the couplers (much like a deadbolt lock) to withstand most high torque scenarios or instances wherein reverse torque on the PTO shaft could be experienced (e.g., while using flex-wing mowers, heavy-duty shredders, tillers, augers, stump grinders, PTO auto-brakes or reverse safety switches, etc.). Since these high torque or reverse torque scenarios on the PTO are often unforeseen, it is therefore required always to install the safety bolt while using the PTO Link® system. The PTO Link® system already comes with a replaceable spring-loaded locking pin (Compact Locking Pin) affixed onto the tractor (female) coupler that engages with the implement (male) coupler for the initial connection. The safety bolt provides the following benefits: Snugly aligns and secures the male and female couplers of the PTO Link® system together to minimize vibration and wear to your driveline; Balances and absorbs excess torque across the entire coupler diameter of the PTO Link® system, providing added strength to your PTO connection during high torque or reverse torque scenarios. Provides enhanced safety, protection, and durability to your PTO Link® system. The Safety Bolt is a Grade 8 bolt featuring a stainless steel, spring-loaded ball detent that functions as an easy insertion and quick-release mechanism. The ball detent retracts when inserted, springs back up when installed through the joined couplers, and locks into place! Installation instructions: Before installing the Safety Bolt, first install the PTO Link® couplers separately on the tractor's PTO (female coupler) and the implement shaft receiver (male coupler). Next, couple the implement and tractor couplers together, aligning the implement coupler's studs into the tractor coupler's openings. Then slightly rotate the implement coupler counter-clockwise (or the tractor coupler clockwise) until the locking pin has locked in place, indicated by an audible click. Now, note the aligned 1⁄2 opening through both couplers of the fully locked PTO Link® system, positioned across the coupler, opposite the locking pin. To install the safety bolt: Place the chamfered edge of the pin into the 1⁄2 opening on either the tractor or the implement coupler. Push the head of the pin through the aligned 1⁄2 openings on both couplers. The ball detent of the safety bolt will release its internal spring and secure both couplers together. To uninstall the safety bolt: Push the chamfered edge of the safety bolt out. Pull the head of the emerging safety bolt through the couplers, releasing the pin. Once accustomed to the safety bolt, your process to reinstall and uninstall will take only a few seconds. When the PTO Link® system is not in use, affix the safety bolt through the 1⁄2 opening on the tractor coupler for convenient storage. Dimensions: (1.225 L x 0.630 W) Weight: 1.5 oz
PTO Link® Compact - Safety Bolt, The PTO Link® Safety Bolt, also known as the Quick-Release Detent Clevis Pin, is essentially a cotterless Clevis Pin
PTO Link® Compact System – Safety Bolt – SPARE RECOMMENDED
Pin Pad
Easy PTO quick connect for tractor attachments - PTO Link
Square Wire Lock Pins are a clevis pin with an attached wire loop that is pulled over the end of the pin. The loop at the end of the bent wire slides over the post for simple securing and removal. Pins are square in shape.
Hillman 2.5-in Square Wire Lock Pin 882696
Turn Latch
PTO Link® Compact System - Replacement Locking Pin & Safety Bolt
Design features include an interlocked and riveted body stronger than conventional padlocks. Commando Locks are ideal protection for sheds, gates, tool boxes, coolers, trailers, storage units, outdoor use, marine environments and more.
Commando Lock 5002 Total Guard 1-3/4 in. Bolt Cutter Proof High Security Keyed Padlock W 1-1/8 in. Shackle Weather Resistant
ProTech™ Aluminum Key-Lock Carabiners
Easy PTO quick connect for tractor attachments - PTO Link
PTO Link® Compact System - Trio Bundle (1 Tractor & 2 Implement
Recommended for you
-
Locking Pin Backs-Keep Your Valuable Pins Secure01 Jun 2024
-
Replacement Hitch Pin Lock – VelociRAX01 Jun 2024
-
MULTI-HOLE LOCKING PIN01 Jun 2024
-
SCALE LOCKING PIN RD HD BRASS – Seraphin USA01 Jun 2024
-
Quick-Release Pins - Grainger Industrial Supply01 Jun 2024
-
Body-Solid - T-Shaped Pop-Pin (8250-012) –01 Jun 2024
-
PTO Push Pin for Tractor Yoke Locking Device fits most North01 Jun 2024
-
Value Collection - 1/2″ Pin Diam, 5-1/8″ OAL, 4-1/2″ Usable Length, Standard Snap & Locking Pin - 51247369 - MSC Industrial Supply01 Jun 2024
-
Locking Pin 335901 Jun 2024
-
CountyLine 3/8 in. x 3-1/16 in. Square Locking Pin, 2-1/2 in. Usable Pin Length at Tractor Supply Co.01 Jun 2024
You may also like
-
Chemical Guys Total Interior Cleaner and Protectant PMWSPI2205001 Jun 2024
-
Fairytale Cottage - GERRARD BUILDERS01 Jun 2024
-
Lantern Moon 6 Tunisian/Afghan IC Crochet Hooks01 Jun 2024
-
Floral Images – Browse 21,177,723 Stock Photos, Vectors, and Video01 Jun 2024
-
Tags N Labels Custom Patches, Stickers, Tags and Labels Manufacturer01 Jun 2024
-
2023 Block Of The Month Crochet Kit01 Jun 2024
-
220V/110V AC 12inch Industrial Exhaust Air Cooling Portable Ventilator Fan Blower With Flexible Hose - China Industrial Fan, Blower01 Jun 2024
-
PureBites Freeze Dried Skin & Coat Chicken Omega 3 Value Size Cat Treats, 1.09 oz.01 Jun 2024
-
Adafruit Stainless Thin Conductive Thread - 2 Ply - 23 Meter/76 ft01 Jun 2024
-
10 pireces) blank insulation kitchen gloves Sublimation heat press01 Jun 2024