Rutland Castable Refractory Cement - 25 lbs

A dry mix cement just add water sets and dries as hard as fire brick. Use to cast custom shapes replace worn-out fire brick or fill large holes in masonry firebox or as a solid stone bed. May also be used to build or repair outdoor fire pits. For indoor or outdoor projects. Rated to withstand up to 2200 degreef. Does not require heat to cure. Minimum 24 hour dry time. May be painted when dry. Approximate coverage: 12 1/2 lbs casts a block 12in x 12in x 1 1/2in. Tan.

Rutland Products 601 Rutland Castable Refractory Cement, 25 lb

A dry mix cement just add water sets and dries as hard as fire brick. Use to cast custom shapes replace worn-out fire brick or fill large holes in masonry firebox or as a solid stone bed. May also be used to build or repair outdoor fire pits. For indoor or outdoor projects. Rated to withstand up to 2200 degreef. Does not require heat to cure. Minimum 24 hour dry time. May be painted when dry. Approximate coverage: 12 1/2 lbs casts a block 12in x 12in x 1 1/2in. Tan.

Rutland Castable Refractory Cement - 25 lbs

Castable Refractory Cement 45% Alumina Hydraulic Bonded Low Cement Castable, 2822F Rated, High Temp Cement for Foundry Furnace Fireplace Oven Stove Forge Lining - 12.5 Lbs: : Industrial & Scientific

images.thdstatic.com/productImages/46100d33-cb5c-4

Simond Store 44 lbs Castable Refractory Cement, 94% Alumina, 3270°F Rated, High Temp Cement for Furnace, Kiln, Foundry, Forge, Fireplace, Fire Pit, Stove, Oven, Hydraulic Bonded Dense Cement Castable: : Industrial

Excellent Mechanical Strength: Characterized with improved particle size distribution, reduced water demand, improved density, optimum cement/bond hydration, helps to enhance its structural strength and resistance to thermal shock compared to castable of similar compositions. High Thermal Resistance: This refractory cement when applied offers high insulation value and can resist temperature up to 3270°F / 1800°C.

94% Alumina Dense Castable Refractory Cement 22 lbs.

RUTLAND Dry Mix 211 is a refractory mortar ideal for joining or repairing masonry flue tile in any gas or wood fireplace and wood, coal, or pellet stove chimney. Just add water, mix, and trowel on to seal and join flue tiles. It can also be used as a parge coating (thin overcoat) when building fireboxes to give your fireplace a nice, even, dark gray finish. Does not require (but is stronger with) heat curing. Meets NFPA 211 standards and NYSCMA Tek Spec 2.0.

Rutland 211 Dry Mix Refractory Mortar, 10 lbs

Castable Refractory Cement, 2800F Rated, for Forge Furnace Foundry Fireplace Oven Stove, 45% Alumina Hydraulic Bonded Low Cement Castable - 12.5 LBS: : Industrial & Scientific

My Homemade Firebrick Liner From Castable Refractory Cement, Antique Coal Stoves & Restorations