QU90008 Gear Marking Compound

Buy Now QU90008 Gear Marking Compound is used for checking the tooth contact pattern when setting up axle ring and pinion gears.
QU90008 Gear Marking Compound is used for checking the tooth contact pattern when setting up axle ring and pinion gears. Contents net wt. 3g. USA Made. Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project! Dan the Gear Man® Tech Notes: Best Results  To Apply Wear Gloves  California Proposition 65 MSDS Matching Parts Applications Tech Note 1: Best Results For best results, there must be some resistance applied to the differential and ring gear as you turn the pinion gear. For a rear axle, you can install the axle shafts and brake drums and lightly apply the parking brakes. For front axles, put a wrench on a ring gear bolt and apply pressure against the rotation of the gear. Tech Note 2: To ApplyBrush the Gear Marking Compound on both sides of several ring gear teeth. Rotate the pinion gear so it turns the ring gear several times in both directions. Check the contact pattern with the desired pattern show in a service manual or installation instructions specifically intended for the gear set you are using. Tech Note 3: Wear GlovesWear gloves when using Gear Marking Compound. Tech Note 4: California Proposition 65This product contains a chemical known in the State of California to cause cancer. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. (source MSDS dated 4/17/2018) Tech Note 5: MSDSMSDS Tech Note 6: Matching PartsQT9404 Application BrushQU90009 Universal Axle Service Pack Applications:  Universal for all Axle Gear Sets

Pinion Marking Compound

Dodge Ram 2500, Ram 3500 AAM 925 Ring-Pinion Kits 2003-2013

Permatex Gear Marking Compound 80038; Prussian Blue .75 oz Squeeze Tube

Buy Now QU50580 GM 10 Bolt Basic Front Differential Bearing and Seal Kit for all 1977-1991 GM 10 Bolt front drive axles in full size Chevy and GMC

QU50580 GM 10 Bolt Basic Front Differential Bearing and Seal Kit

QU40481 3.54 Ratio Genuine Dana Ring & Pinion Kit for Dana 60 & 61

QU40482 Fast Ratio Bare Differential Case for Dana 70, Dana 71

Dodge Ram Front Axle Service 2003-2013

is a good used factory 4.10 ratio gear set. 4.10 ratio Dana 50 axles were made from 1980-2005. Ring gear tooth count is 41, pinion gear tooth

QU20275U Used 4.10 Ratio Dana 50 Ring and Pinion Set

QU20240U Good Used Ford Dana 50 Loaded Differential Case

Qu40252 Dana 60 4.10 Ratio Genuine Dana Spicer Ring and Pinion Set

TK4885 Premium Dana 50 Differential & Pinion Timken Bearing Only Kit

Qt9404 Application Brush - QT9404 Application Brush is ideal for applying Gear Marking Compound or Anti-Seize Lubricant to parts. Brush fibers and steel handle are resistant to most automotive chemicals. USA made.

QuadTool Qt9404 Application Brush

Great for getting a perfect pattern on your ring & pinion.

4 oz. Yellow Gear Marking Compound Grease - Ring & Pinion Gears

QU20237U USED 4.30 Ratio Dana 50 Ring and Pinion Set