Pro Tapes Pro-Spike Spike Tape: 1/2 in x 45 yds. (Fluorescent

By A Mystery Man Writer

Last updated 15 Jun 2024

Arrives by Thu, Feb 1 Buy Pro Tapes Pro-Spike Spike Tape: 1/2 in x 45 yds. (Fluorescent Yellow) at

Pro Tapes Pro Spike Tape colors in 1/2 in. x 45 yds. are available for an immediate single roll or case shipments. If you are looking for 50-yard versions of fluorescent pink, fluorescent yellow, fluorescent green, and fluorescent orange, or need 55-yard versions of colors; black, brown, dark green, grey, purple, red, white, or yellow please see JVCC Stage-Set Spike Tape. ProTapes Pro Spike tape is matte cloth tape with a rubber-based adhesive system for applications that require a temporary hold with no adhesive residue. The high visibility colors are an added benefit for stair marking, exits, and stage designs. Pro Spike tape is made with high strength and performance adhesive for consistent results every time. Pro Spike tape is very conformable to irregular surfaces and shapes for even the most demanding projects. Weather and abrasion resistance, as well as the hand tearable easy to use nature, make Pro Tapes Pro Spike tape a must-have. Typical product applications include stage marking, labeling, dance floor splicing, wire, and cable bundling and more. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 41m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: vinyl coated cloth
- Adhesive: synthetic rubber
- Thickness: 11 mils (carrier, adhesive)
- Adhesion: 80 ounces per inch (to stainless steel test panel)
- Tensile Strength: 50 pounds per inch (longitudinal)
- Application Temperature: 50F to 200F
- Elongation: 5 %