3M PPS Paint Preparation System Kit, Mini Size, 200 Micron Filters MMM

3M PPS Paint Preparation System Kit, Mini Size, 200 Micron FiltersFeatures and Benefits: Kit contains 50 disposable mini lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs The 200 micron filters are recommended for traditional solvent based paint or primer applications Graduated measurement to 5 1/2 oz - with generic mix ratio film insert For use with part number 16115 PPS is a complete painting system from 3M which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS system with virtually any spray gun. PPS replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and
3M PPS Paint Preparation System Kit, Mini Size, 200 Micron FiltersFeatures and Benefits: Kit contains 50 disposable mini lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs The 200 micron filters are recommended for traditional solvent based paint or primer applications Graduated measurement to 5 1/2 oz - with generic mix ratio film insert For use with part number 16115 PPS is a complete painting system from 3M which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS system with virtually any spray gun. PPS replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use -- meaning less operator exposure to solvents and reduction in VOCs. Since PPS uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.

USE WITH ORIGINAL PPS SPRAY GUN CUP – Includes 25 disposable lids and liners for the large 3M PPS paint cup. Use to apply paints, stains, varnishes,

3M PPS (Original Series) Paint Spray Gun Cup Lids and Liners Kit, 16325, Large, 28 oz, 125-Micron Filter, Use w/ Paint Gun for Cars, Furniture, Home

3M 26005, PPS Series 2.0 Adapter, Type S4, 12 mm Female, 1.0

3M™ PPS™ Series 2.0 Spray Cup System

PPS™ Series 2.0™ 200 ml Mini Gravity Feed Spray Cup System Kit with 200 Micron Filter (26114) by 3M®. PPS™ Series 2.0 Spray Cup System is next

3M® 26114 - PPS™ Series 2.0™ 200 ml Mini Gravity Feed Spray Cup System Kit with 200 Micron Filter

The 3M PPS 2.0 Midi Cups are pressurized hard cups and collars for use with the 3M PPS series 2.0 spray system. They are designed to efficiently spray thick, high viscosity liquids. All-In-One SolutionThis all-in-one solution reduces the chance of outside contamination and reduces paint consumption. PPS reduces cleaning solvent consumption by up to 70 percent and reduces prep and clean-up time by 50 percent.

3M 26121 2.0 PPS H/O Pressure Cup Mid

Calibrated mixing cups, flexible liners, lids with built-in 200 micron filters, and locking rings. As freshly filtered paint is dispensed, the liner collapses. This allows the spray gun to be operated at any angle in any plane through 360掳, including fully inverted. Expensive, unused paint can be saved in capped liner for storage and re-use. One pot for mixing and spraying. Up to 70% savings of cleaning solvent. Faster system from mixing to disposal. Less operator exposure to solvents.

3M Mini PPS Lids & Liners Kit, 200mu, Pack of 50

Kit contains 50 disposable lids with 200 micron or 125 micron filters - 50 disposable liners - 1 reusable hard shell cup and 32 sealing plugs.

3M 26114 PPS Series 2.0 Spray Cup System Kit, Mini (6.8 fl oz, 200 ml) 200 Micron Filter

3M 26115, PPS Series 2.0 Cup, Mini (6.8 fl oz, 200 mL), 7000120108

Kits are available in midi (13.5 oz 400 mL) and standard (22 oz 650 mL) sizes excellent for most mid range repairs. Kit contains (6) liners (6) lids with quarter turn locking system and built-in full diameter 200 micron filters a reusable hard cup and 16 sealing plugs. 3M PPS cup lid assembly.

3M - 26172 - PPS Series 2.0 6-Pack Starter Kit, Standard (22 fl oz, 650 ml)