Photo Emulsion, Sensitiser & Remover Bundle 250ml or 1ltr Hunt the Moon

This Kits item by HuntTheMoonPrint has 52 favorites from shoppers. Ships from United Kingdom. Listed on Oct 26, 2023
Fantastic Money Saving Set! Contains either; 1x 250ml Hunt The Moon Diazo Photo Emulsion & Sensitiser 1x 250ml Hunt The Moon Photo Emulsion Remover The individual RRP on this pack is £27.98, available for only £19.99! or 1x 1000ml Hunt The Moon Diazo Photo Emulsion & Sensitiser 1x 250ml Hunt The Moon Photo Emulsion Remover The individual RRP on this pack is £47.98, available for only £39.99! Great for exposing your screens and printing with water based and even plastisol inks! Instructions for use; Mixing: For the 250ml Photo Emulsion Fill the sensitiser bottle to 25% with water, replace the lid and shake until dissolved, then add this to the emulsion. Rinse the sensitiser bottle out filling to approximately 25%, shaking and adding to the emulsion. For the 1 litre Photo Emulsion Fill the sensitiser bottle to 50% with water, replace the lid and shake until dissolved, then add this to the emulsion. Rinse the sensitiser bottle out filling to approximately 25%, shaking and adding to the emulsion. Note: For coarse fabric or for a thicker, more viscous emulsion, mix the diazo with a little less water. This will create a thicker emulsion coat and may require a longer exposure. Stir the emulsion well until the contents are fully mixed. After mixing the emulsion should be left for at least an hour to allow bubbles to disperse. Screen Preparation: Screens, new or used, should be de-greased. We recommend our mesh prep here to prevent static, to remove dust and to eliminate pinholes & fish eyes. The screens should then be well washed and dried. Coat the screens with 1 or 2 coats to the underside and 1 or 2 coats on the top side, wet on wet is recommended. To get an even coat, and to reduce wastage a scoop coater is really handy! Dry the screens in a near horizontal position in darkness or subdued lighting, be careful that dust does not settle on the screen surface. Exposure: Correct exposure time is most important thing in obtaining the best results from our emulsion. This is where a 'Step Test' comes in handy! Exposure times depend on the type of the light source and the distance between screen and the light. Once your exposure time is found, you shouldn't need to vary it. Washing: First wet the screen with cold or warm water, don't use very hot water. After a few minutes the unexposed emulsion can then be removed using a gentle water spray, try to avoid using high pressure washing. Immediately after rinsing remove surplus water with a clean chamois leather or sponge. Drying: Lay the screen in a near horizontal position and dry using a fan heater/dryer at no more than 40 degrees C. And there you have it! One ready to print screen! We have lots of useful guides on screen exposure in our blog section, and we're happy to help! Just give us a call.

Speedball Diazo Photo Emulsion Remover - 32 oz

Photo Emulsion - Australia

UV Exposure Unit Led Tabletop Q2 X 16x20 Screens 43t LED Tabletop Fits Screens UV Exposure Unit Exposure Unit Screen Printing - Australia

Speedball Art Products Diazo Photo Emulsion Kit for Screen Printing

Pre Burned Screen - New Zealand

HuntTheMoonPrint - Ireland

Photo Emulsion Set 250ml or 1ltr Hunt the Moon

An excellent kit for use in high-quality screenprinting. This new photo emulsion kit contains a 7oz jar of Diazo Photo Emulsion, a 1oz bottle of Diazo sensitizer, a 7oz jar of Photo Emulsion Remover and complete instructions.

Speedball - Diazo Photo Emulsion Kit

LUMASILK BRIGHTENING EMULSION™, Dark Spot Corrector

Hunt Speedball