PTO Link® Compact System - Replacement Locking Pin & Safety Bolt Combo - PTO Link

Product Features: Locking Pin-Compact (replacement) Spring Loaded Stainless Steel For Use with PTO Link® Compact - Tractor (Female) Coupler Dimensions: 2”L x 0.75”W) (3/8” Threads) Weight: Locking Pin-Compact Weight: 2.3 oz NOTE: When replacing, use Loctite® Threadlocker 271 Red (INCLUDED) on housing threads and wrench tight PTO Link® Compact - Safety Bolt The PTO Link® Safety Bolt, also known as the Quick-Release Detent Clevis Pin, is essentially a cotterless Clevis Pin that features a ball detent that depresses and springs up to hold the Clevis Pin into place. This one-piece locking clevis pin is fast and secure. It also acts as an alignment pin for the two mating couplers of the PTO Link® system and further secures the couplers (much like a deadbolt lock) to withstand most high torque scenarios or instances wherein reverse torque on the PTO shaft could be experienced (e.g., while using flex-wing mowers, heavy-duty shredders, tillers, augers, stump grinders, PTO auto-brakes or reverse safety switches, etc.). Since these high torque or reverse torque scenarios on the PTO are often unforeseen, it is therefore required always to install the safety bolt while using the PTO Link® system. The PTO Link® system already comes with a replaceable spring-loaded locking pin (Compact Locking Pin) affixed onto the tractor (female) coupler that engages with the implement (male) coupler for the initial connection. The safety bolt provides the following benefits: Snugly aligns and secures the male and female couplers of the PTO Link® system together to minimize vibration and wear to your driveline; Balances and absorbs excess torque across the entire coupler diameter of the PTO Link® system, providing added strength to your PTO connection during high torque or reverse torque scenarios. Provides enhanced safety, protection, and durability to your PTO Link® system. The Safety Bolt is a Grade 8 bolt featuring a stainless steel, spring-loaded ball detent that functions as an easy insertion and quick-release mechanism. The ball detent retracts when inserted, springs back up when installed through the joined couplers, and locks into place! Installation instructions: Before installing the Safety Bolt, first install the PTO Link® couplers separately on the tractor's PTO (female coupler) and the implement shaft receiver (male coupler). Next, couple the implement and tractor couplers together, aligning the implement coupler's studs into the tractor coupler's openings. Then slightly rotate the implement coupler counter-clockwise (or the tractor coupler clockwise) until the locking pin has locked in place, indicated by an audible "click." Now, note the aligned 1⁄2" opening through both couplers of the fully locked PTO Link® system, positioned across the coupler, opposite the locking pin. To install the safety bolt: Place the chamfered edge of the pin into the 1⁄2" opening on either the tractor or the implement coupler. Push the head of the pin through the aligned 1⁄2" openings on both couplers. The ball detent of the safety bolt will release its internal spring and secure both couplers together. To uninstall the safety bolt: Push the chamfered edge of the safety bolt out. Pull the head of the emerging safety bolt through the couplers, releasing the pin. Once accustomed to the safety bolt, your process to reinstall and uninstall will take only a few seconds. When the PTO Link® system is not in use, affix the safety bolt through the 1⁄2" opening on the tractor coupler for convenient storage. Dimensions: (1.225" L x 0.630" W) Weight: 1.5 oz
Product Features: Locking Pin-Compact (replacement) Spring Loaded Stainless Steel For Use with PTO Link® Compact - Tractor (Female) Coupler Dimensions: 2”L x 0.75”W) (3/8” Threads) Weight: Locking Pin-Compact Weight: 2.3 oz NOTE: When replacing, use Loctite® Threadlocker 271 Red (INCLUDED) on housing threads and wrench tight PTO Link® Compact - Safety Bolt The PTO Link® Safety Bolt, also known as the Quick-Release Detent Clevis Pin, is essentially a cotterless Clevis Pin that features a ball detent that depresses and springs up to hold the Clevis Pin into place. This one-piece locking clevis pin is fast and secure. It also acts as an alignment pin for the two mating couplers of the PTO Link® system and further secures the couplers (much like a deadbolt lock) to withstand most high torque scenarios or instances wherein reverse torque on the PTO shaft could be experienced (e.g., while using flex-wing mowers, heavy-duty shredders, tillers, augers, stump grinders, PTO auto-brakes or reverse safety switches, etc.). Since these high torque or reverse torque scenarios on the PTO are often unforeseen, it is therefore required always to install the safety bolt while using the PTO Link® system. The PTO Link® system already comes with a replaceable spring-loaded locking pin (Compact Locking Pin) affixed onto the tractor (female) coupler that engages with the implement (male) coupler for the initial connection. The safety bolt provides the following benefits: Snugly aligns and secures the male and female couplers of the PTO Link® system together to minimize vibration and wear to your driveline; Balances and absorbs excess torque across the entire coupler diameter of the PTO Link® system, providing added strength to your PTO connection during high torque or reverse torque scenarios. Provides enhanced safety, protection, and durability to your PTO Link® system. The Safety Bolt is a Grade 8 bolt featuring a stainless steel, spring-loaded ball detent that functions as an easy insertion and quick-release mechanism. The ball detent retracts when inserted, springs back up when installed through the joined couplers, and locks into place! Installation instructions: Before installing the Safety Bolt, first install the PTO Link® couplers separately on the tractor's PTO (female coupler) and the implement shaft receiver (male coupler). Next, couple the implement and tractor couplers together, aligning the implement coupler's studs into the tractor coupler's openings. Then slightly rotate the implement coupler counter-clockwise (or the tractor coupler clockwise) until the locking pin has locked in place, indicated by an audible click. Now, note the aligned 1⁄2 opening through both couplers of the fully locked PTO Link® system, positioned across the coupler, opposite the locking pin. To install the safety bolt: Place the chamfered edge of the pin into the 1⁄2 opening on either the tractor or the implement coupler. Push the head of the pin through the aligned 1⁄2 openings on both couplers. The ball detent of the safety bolt will release its internal spring and secure both couplers together. To uninstall the safety bolt: Push the chamfered edge of the safety bolt out. Pull the head of the emerging safety bolt through the couplers, releasing the pin. Once accustomed to the safety bolt, your process to reinstall and uninstall will take only a few seconds. When the PTO Link® system is not in use, affix the safety bolt through the 1⁄2 opening on the tractor coupler for convenient storage. Dimensions: (1.225 L x 0.630 W) Weight: 1.5 oz

The PTO Link® Compact system is specifically designed to work for most subcompact and compact tractors up to 70 HP* (*with category 1 implements

PTO Link® Compact System - Star Bundle (1 Tractor & 4 Implement Couplers)

1227B1484 Meritor_NA

pto shaft components

COMPATIBILITY: PTO Link HD System works with rear 6-spline 540 RPM PTO (for tractors 35 HP to 130 HP), and designed for all tractors using

PTO Link HD Quick-Connect System - Duo Bundle (1 Tractor/Female Plate + 1 Implement/Male Plate), Fits Tractors 35 HP to 130 HP

L8825 - Stainless Double Point T-Handle Latch with Mounting Holes and Rods - Paris Supply, LLC

Easy PTO quick connect for tractor attachments - PTO Link

Lock-Right Performance Locker Kit Fits 41-71 Jeep & Willys with Dana 25/27 front with 10 Splines

Vapormatic PTO Drive Shaft and Components Catalogue by The Vapormatic Co. Ltd. - Issuu

NSI PTO-500

VEVOR Slip Clutch PTO Slip Clutch 1 3/8 6 Spline Ends Yellow PTO Fiction Clutch

Heavy Duty Coupler Shaft Locking Pin Hitch Pto Pin Round Loop Wire Lock Trailers Pin For Farm Lawn Garden,safety Pins Fastener - Dowel - AliExpress

China Type S Taper Lock Weld-On Hubs , Manufacturer, Supplier, factory exporter distributor, made in China - HZPT CORP