Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles

By A Mystery Man Writer
Last updated 17 Jun 2024
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Deck Grip is a UV and Chemical Resistant non-slip coating perfect for use around swimming pool areas and concrete or tiled patios to help prevent slips and falls on floors when wet
DESCRIPTION Deck Grip is an anti-slip sealer for concrete and other stone surfaces. This versatile non-slip coating is non-yellowing, water-based acrylic and is easy to apply. Deck Grip non-slip concrete results in a clear, semi-gloss and barefoot-friendly finish that is chemical resistant, UV resistant and highly durable. Deck Grip is the perfect anti-slip solution to treat slippery pool decks, and all types of stamped (sealed or unsealed) concrete decks.  Compatible on virtually all types of natural stone surfaces where anti-slip sealers are desired. Deck Grip Roller - Click here to buy more Sealed Stamped Concrete - Deck Grip will work great on top of all sealers and is chemical and chlorine resistant.  Ideas for surfaces surrounding pools and spas.  Please start with a clean dry surface prior to application.  Allow 24 hours to cure.  Apply 2 thin coats for best durability and slip resistance.  NOTE:  Some textured surfaces require 3 coats for best traction. Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards. 0.52 Wet DCOF - ANSI B101.30.53 Wet DCOF – ANSI A137.1 / A326.30.62 Wet SCOF - ANSI B101.1 Installation Instructions (TDS) Safety Data Sheet (SDS) PRODUCT FEATURES Great for bare feet Use it on pool decks and sealed concrete One 3/8” nap roller included per gallon Deck Grip is available in 1 gallon and 5-gallon pails Can be used indoors or outdoors It dries clear with a semi-gloss finish and is easy to apply One gallon covers 300 – 600 square feet Roller Included (Click here to buy more) SPECIFICATIONS Gallon 5-Gallon Coverage per Sq Ft 300-600 Appx 2,500 Cost per Sq Ft (Appx.) $0.25 $0.23 ⅜” Nap Rollers Included 1 5 Volume (liters) 3.78 18.92 INSTRUCTIONS Safety Precautions: • Use in a well-ventilated area. • If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Hotline at 1-800-424-LEAD or www.epa.gov/leadfor more information. Optional Safety Equipment: • Chemical-resistant gloves • Eye protection • Mask Surface Preparation: • Surface preparation varies by surface. Please see the chart below for specific surface preparation instructions. Application Instructions: Step 1: Mixing Additive: The quantity of SlipDoctors Deck Grip Additive to be used depends on the level of slip resistance desired(see chart below). The maximum texture is recommended for the most effective anti-slip protection. Pour the desired amount of Additive into the Deck Grip container and gently mix to ensure even distribution. Avoid shaking to prevent foaming. Mix occasionally during application. Step 2: TEST: Deck Grip should be tested on a small inconspicuous area before full application Step 3: Deck Grip can be rolled or sprayed, rolling is recommended. Roll: Use the included 3/8” nap roller to evenly coat the surface. Avoid puddling in low areas. If puddles occur, roll them out. Two thin coats are recommended rather than one thick coat. Spray: Spray using a 5916 nozzle that produces a flow of 1/10 of one gallon per minute. Spray in a fine fog pattern without spurts or dribbles to form a thin continuous film. Avoid puddling in low areas. If puddles occur, roll them out. Step 4: For added protection, greater performance, and durability, we recommend applying Deck Gripin in two thin coats. Allow the first coat to dry for 2-4 hours before applying the second coat. The second coat should be applied at a right angle to the first coat. Step 5: Clean-up: While Deck Gripis still wet, equipment may be cleaned with soap and water. Once dried, equipment may be cleaned with a solvent, such as xylene or toluene. Maintenance: For general cleaning and maintenance, use a light pressure rinsing. For best results to remove oily deposits or other foreign matter, apply pH-neutral cleaner recommended dilution rate and scrub lightly with a soft bristle deck brush.Do not use alcohol-based cleaners, such as pine-sol.
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
SLIP DOCTORS Deck Grip 1 gal. Clear Semi-Gloss Waterbased Non-Slip Exterior/Interior Concrete Sealer for Slippery Surfaces S-CT-DECKGRP1G - The Home Depot
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
SlipDoctor's GripX Non-Slip Coating and Sealant for Indoor and Outdoor Tiles, Concrete and Natural Stone - Clear Anti-Slip for Slip Resistant Flooring: : Tools & Home Improvement
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Deco Grip Deco-Crete Supply
INCREASE SLIP RESISTANCE on wet and dry natural surfaces with Grip X Stone Sealer. This 100% transparent indoor and outdoor anti-slip sealant enhances
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
SlipDoctor's GripX Non-Slip Coating and Sealant for Indoor and Outdoor Tiles, Concrete and Natural Stone - Clear Anti-Slip for Slip Resistant Flooring
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Deco Grip Deco-Crete Supply
Ensure the safety of employees and guests with this SlipDoctors Deck Grip S-CT-DECKGRP1G 1 gallon clear indoor & outdoor non-slip sealer for concrete! Ideal for indoor and outdoor use, this sealer enhances the traction of your deck to prevent slips and falls. It is intended for use on slippery concrete or natural stone surfaces. Since it is chemical- and chlorine-resistant, it is especially ideal for pool decks and stone or concrete decks.
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Deck Grip - Clear Indoor & Outdoor Non-Slip Sealer for Concrete, Size: Gallon
DESCRIPTION, Deck Grip is an anti-slip sealer for concrete and other stone surfaces. This versatile non-slip coating is non-yellowing, water-based
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Deck Grip - Clear Indoor & Outdoor Non-Slip Sealer for Concrete
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
First Aid Symbol Vector Stock Vector Illustration Of , 59% OFF
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
SlipDoctor's GripX Non-Slip Coating and Sealant for Indoor and Outdoor Tiles, Concrete and Natural Stone - Clear Anti-Slip for Slip Resistant Flooring: : Tools & Home Improvement
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Notice Please Wash Your Hands Sign SIGN-724 Barco Products, 43% OFF
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Deck Grip Non-Slip Sealer (5 Gallon) Clear Barefoot-Friendly Anti-Slip Coating - Create Traction for Outdoor or Indoor Floors and Pool Decks: Science Lab Matting: : Tools & Home Improvement
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Amlodipine Tablet Uses, Side Effects, Dosage And Price
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
Notice Please Wash Your Hands Sign SIGN-724 Barco Products, 43% OFF
Dura Grip High-Performance Non-Slip Epoxy Paint is an anti-slip paint coating specifically designed to provide a hard - durable barefoot-friendly textured non-slip paint finish on a variety of substrates.
Deck Grip – Clear Outdoor Non-Slip Sealer for Concrete and Tiles
SlipDoctors Dura Grip (Safety Blue, Gallon) Non-Slip Paint

© 2014-2024 academicdiary.news. All rights reserved.