Mr. Nola's Glitter Glass-Coat Epoxy

By A Mystery Man Writer

Last updated 16 May 2024

For Tumblers, Artwork & Casting We set out to do the impossible—make our ultra-premium GLASS-COAT epoxy resin even more beautiful, more durable and longer-lasting. And we did it. Our chemists spent the past year engineering its unique formula to offer even greater levels of performance. Artists who work with GLASS-COAT set themselves apart by delivering a thick, glossy topcoat with breathtaking clarity that lasts. Introducing the next generation of GLASS-COAT. Easy-to-use, low odor, self-leveling, bubble resistant epoxy resin, with a tough durable finish specially formulated for tumbler makers. Maybe be suitable for silicone molds in applications less than 1/4 inch. Engineered with UV inhibitors to prevent yellowing and provide long-term clarity. Touch dry in 6 hours. Full cure time 72 hours. Permanent and waterproof once fully cured, Resin (Part A) is FDA compliant resin. Scratch-resistant. Can be used with Marabu
For Tumblers, Artwork & Casting We set out to do the impossible—make our ultra-premium GLASS-COAT epoxy resin even more beautiful, more durable and longer-lasting. And we did it. Our chemists spent the past year engineering its unique formula to offer even greater levels of performance. Artists who work with GLASS-COAT set themselves apart by delivering a thick, glossy topcoat with breathtaking clarity that lasts. Introducing the next generation of GLASS-COAT. Easy-to-use, low odor, self-leveling, bubble resistant epoxy resin, with a tough durable finish specially formulated for tumbler makers. Maybe be suitable for silicone molds in applications less than 1/4 inch. Engineered with UV inhibitors to prevent yellowing and provide long-term clarity. Touch dry in 6 hours. Full cure time 72 hours. Permanent and waterproof once fully cured, Resin (Part A) is FDA compliant resin. Scratch-resistant. Can be used with Marabu alcohol inks, glitter, pigments and other colorants. Ultra-clear, sandable, heat tolerant medium viscosity, VOC free resin. Conforms to ASTM D-4236. Work time 30-45 minutes. Uncured resin cleans up with acetone. Specifications: Mixing Ratio: 1:1 Viscosity: Medium Finish: Glass-like, crystal clear, scratch-resistant finish UV Resistant: UV-resistant formula protects against yellowing Heat Resistant: 500°F Odor: Zero VOC, low odor Application Temperature: 70-85°F Working Time: 45 minutes @ 77°F Tack-free Time: 6-12 hours @ 77°F Time to Sand: 12-24 hours @ 77°F Fully Cured (days): 3-5 days Available Sizes: 8 oz. Kit = 4 oz. A + 4 oz. B 16 oz. Kit = 8 oz. A + 8 oz. B 32 oz. Kit = 16 oz. A + 16 oz. B 1/2 gal. Kit = 32 oz. A + 32 oz. B 1 gal. Kit = .5 gal. A + .5 gal. B 2 gal. Kit = 1 gal. A + 1 gal. B Mixing Instructions: Mix ratio is 1:1. Mix one Part A (resin) to one Part B (hardener). Pour equal amounts of Part A and Part B into a flat-bottomed mixing container. Mix gently, stirring in one direction, while scraping bottom and sides of mixing container to ensure a complete mixture. Mix for 1-2 minutes or until mixture is clear. Pour immediately on your tumbler. Recommended working temperature should be above 73°F, and less than 60% humidity.