Mold Release, PVA and Hairspray - Epoxyworks

14 - Epoxyworks

Seal/Fix Non Silicone Mold Release Spray (13.5 fl oz) Aerosol

Water Based Epoxy Mold Release

How to use MOLD RELEASE. Epoxy TIP Everyone should know. #shorts

mold release - Epoxyworks

TAP PVA Mold Release Liquid : TAP Plastics

SIMPLE APPLICATION! Easily Spray, Roll, Sponge Or Brush On! Stays Where You Need It With No Shrinking Or Staining! EFFORTLESS RELEASE! Glossy, Smooth

PVA PARTALL #10 LIQUID EASY CASTING MOLD RELEASE, PREMIUM PROFESSIONAL QUALITY, Diy Resin Fiberglass Mold Release For Silicone & Resin Casting Molds

PVA, or polyvinyl alcohol, should be used with our #1016 Partall Wax for the easy release of parts from a mold. Wax should be applied to the mold, 3–4 layers thick, and buffed to a high gloss. Once the final layer of wax has dried, PVA should be applied with the following considerations:PVA can be brushed on, but for best results, apply with a spray gun, 12–18 inches away from substrate. Generally, apply in three layers: the first, a thin mist, allowing 10-15 minutes to dry completely.

Fibre Glast - PVA Release Film

Epoxy Resin & Wood Basics Series - Mold Release (Part 6/11)

Epoxy Resin & Wood Basics Series - Mold Release (Part 6/11)

Epoxy Resin & Wood Basics Series - Mold Release (Part 6/11)

How to use MOLD RELEASE. Epoxy TIP Everyone should know. #shorts