Mold Making Silicone Thinner - GT Products, Inc

GT Products silicone thinner can be used to drop the viscosity of any mold making silicone.   This thinner is a 50 Centistoke Dimethyl Fluid and will be compatible with any GT Products Silicone system.   Lowering the viscosity of a mold making system can allow the silicone to easier flow into smaller detail. GT Products, Inc.  recommends only adding  3% to 5%.  Adding too much silicone fluid can adversely effect the physical properties of the silicone itself.  Tear and tensile strength will be the most greatly effect properties if too much silicone thinner is used.

Mold Making Silicone - GT Products, Inc

Compression Molding Epoxy - Entropy Resins

GI-1000 - The Compleat Sculptor

ER-200 Release Agent

Mold Max™ 30 Standard - 1.1kg - AMT Composites

Molding Materials - Chemical Concepts

Silicon Mold Making RTV 2 Casting Concrete Product Liquid Silicone

Silicone Thinner

Silicone Thinner® - AMT Composites

Christmas Silicone Mold - Silicone Zone Life is Art!

Making silicone with mica powder to create a colorful mold! Easy Mixing & Pouring - This mold making silicone rubber kit includes part A and part B, the mixing ratio is 1:1. Pour the Part A and Part B together, stir the silicone rubber thoroughly for 5 minutes for best results. Working time of 5 minutes at room temp and with a shore hardness of 15A.

Silicone Mold Making Kit Liquid Silicone Rubber Bubble Free Translucent Clear Mold Making Silicone-Mixing Ratio 1:1-Molding Silicone for Resin Molds