Labrico, Adjuster 2x4

Labrico 2x4 Adjusters are a simple, easy way to get started on your next project. By attaching the adjuster to 2x4 lumber and sticking it into the space between the ceiling and the floor, you can erect a post that will serve as a foundation for your DIY project. No hole drilling in the ceiling or floor is required—just

Labrico 2x4 Adjusters are a simple, easy way to get started on your next project. By attaching the adjuster to 2x4 lumber and sticking it into the space between the ceiling and the floor, you can erect a post that will serve as a foundation for your DIY project.

No hole drilling in the ceiling or floor is required—just turn the jack to secure the lumber in place. And when you're finished using it, simply take it down and store it away until your next project.

*For vertical installation only.

Model No.	DXO-1E (Off-white) / DXB-1E (Bronze)
Mounting dimensions (ceiling height)	Up to 108.3 in. high
Working load  *reference value	44 lbs for each 2x4 pillar
Product dimensions	Width 3.7 in Depth 1.7 in Height 4.8-5.5 in(ceiling cap and upper cap) / 1.6 in(base cap)

Material Indication
Resin parts…ABS Resin, Synthetic Rubber
Screws…Steel (Plating)
Spring…Spring steel (Plating)

Labrico 2x4 Adjusters are a simple, easy way to get started on your next project. By attaching the adjuster to 2x4 lumber and sticking it into the space between the ceiling and the floor, you can erect a post that will serve as a foundation for your DIY project. No hole drilling in the ceiling or floor is required—just turn the jack to secure the lumber in place. And when you're finished using it, simply take it down and store it away until your next project. *For vertical installation only. Model No. DXO-1E (Off-white) / DXB-1E (Bronze) Mounting dimensions (ceiling height) Up to 108.3 in. high Working load *reference value 44 lbs for each 2x4 pillar Product dimensions Width 3.7 inDepth 1.7 inHeight 4.8-5.5 in(ceiling cap and upper cap) / 1.6 in(base cap) Material Indication Resin parts…ABS Resin, Synthetic RubberScrews…Steel (Plating)Spring…Spring steel (Plating)

Labrico, Adjuster 2x4

LABRICO(ラブリコ) 2ｘ4 棚受ダブル【 棚受け DIY 壁 柱 棚 】LF108B04b000 : lf108b04b000jhdxobv-3 : すまいのコンビニ - 通販 - Yahoo!ショッピング

A new series that can be used outdoors in LABRICO where you can make shelves without making holes--also for men's interiors! []

壁面 収納 diyの通販｜au PAY マーケット

平安伸銅工業 LABRICO DIY収納パーツ 2×4アジャスター - その他

Heian LABRICO DIY Parts 2×4 38×89mm Adjuster Off White DXO-1 Description Condition: New ・This product is intended to stretch pillars to the floor and ceiling without using screws or nails by attaching to commercially available 2 x 4 materials (38 x 89 mm). ・ Prepare 2 x 4 materials that are 95 mm shorter than the height of the ceiling. ・ Install in a place with a solid base. If it is installed in a place with a weak base, it may cause a fall or damage the ceiling.

Heiain Heian LABRICO DIY Parts 2×4 38×89mm Adjuster Off White DXO-1

Heian Shindo LABRICO DIY Storage Parts, 2 x 4 Adjuster Strong Type (Off-White) x 1, Road Bike Hanger x 1 : Sports & Outdoors

Heian Shindo LABRICO DIY Storage Parts, 2 x 4 Adjuster Strong Type (Off-White) x 1, Road Bike Hanger x 1

LABRICO(ブロンズ) X フロリダピンク塗装ツーバイセット【240センチ】※5セット以上は割引が自動的に適用されます※※｜IPC DIYLab.｜DIY木材カット無料

Unusual Japanese Device for Adding Posts to a Room Without Drilling - Core77

租客必備) 日本Labrico免鑽牆頂天立地架層架支撐, 傢俬＆家居, 傢俬

CAWCAT>日本空運Labrico 頂天立地置物架2x4 角材專用收納拼接卡榫DIY 平安伸銅DXO-1

Hardware Brackets for 2x4 Lumber, DIY Home Storage, No Floor or Wall Damage, Labrico 2x4 Adjuster Brackets - Bronze…