10 2 Digit Number Stencil Kit 00-99 — 1-800-Stencil

10 Number Kit Stencil SKU: 0380-010/0381-010

Our 10 inch number stencil kit is very handy to have. The 10 inch height is measured from the actual painted area, with the outside height of the material being 14 tall. Theses 10 inch number stencils are also designed with 1 inch of spacing on the sides, this is a feature that allows you to align all of the stencils next to each other and paint your stencils with a perfect 2 inch spacing. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

Specifications

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4380-010 5380-010 6380-010 7380-010

4381-010 5381-010 6381-010 7381-010

Selecting a Stencil Grade:

• 1/8 (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
• 1/16 (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8 counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
• 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
• 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.

10 2 Digit Number Kit 00-99 SKU: 0382-010

When performing a large numbering project, this 10 inch 2 digit number kit is an extremely useful asset. Rather than having to paint your individual number stencils hundreds of times, you only have to paint one stencil for every hundred numbers. Contractors have reported back to us that they can't even imagine having to go back after purchasing one of these kits. Most of the time users report paying for the kit on its first use. Our 10 2 digit number kit is designed with 2 of over-spray on all sides , we can customize the kit to have 3 over-spray for an additional fee if you would like. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.

Specifications

Country of origin: USA

Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.

Other Part Numbers

4382-010 5382-010 6382-010 7382-010

Selecting a Stencil Grade:

• 1/8 (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
• 1/16 (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8 counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
• 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
• 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.