Impressive Putty (ReMold Putty) 6 oz. Kit (with 2 oz. Activator) – MakerTechStore

By A Mystery Man Writer

Last updated 13 May 2024

Impressive Putty (ReMold Putty) 6 oz. Kit (with 2 oz. Activator) – MakerTechStore

Impressive Putty (previously called ReMold Putty) is ComposiMold's newest reusable mold making material in a putty form. It can be applied directly to almost any model, capturing the smallest detail and curing within minutes. ReMold Putty can be used to make molds of sculptures, prototypes, candles, picture frames, coins, etc. You can cast wax, clay, low melt plastics, low melt metal, and a variety of resins into ReMold Putty. It can be remelted and used over and over.

Simple two part system
High melting point :185°F (85°C)
Shore Hardness: 60A
No mold container required
Reusable
Microwaveable
Compatible with dozens of casting materials
Contains: 6 oz. putty, 2 oz. activator, and a microwaveable bag

DIRECTIONS: Place the Putty in the microwaveable safe bag and add 2 drops of the Activator for every ounce of Putty. Seal the bag and heat the Putty in the microwave until completely melted. Smooth the putty to remove lines and make into a shape large enough to hold your master object. Next, push the ReMold Putty over your master part or push the master part into the putty. Let the ReMold Putty solidify and remove the master object. Make your castings and then remelt to reuse!

Important note:

The activator is important for solidifying the mold and useful as a built in mold release, but it will slowly leak out of the mold over time. Too much activator on the mold surface is undesirable, remove the excess and pools of the activator with a sponge or dry cloth before pouring your casting resin. Once a mold has been made, it should be poured (cast) as soon as possible if you want to avoid the leakage.

If the activator is not properly cleaned off the mold, it is possible for resins and other casting materials to become discolored by the mold (but does not seem to effect the quality of the cast.)

Eco-Friendly, One-Part Rubber Mold Making Re-usable, Re-Heat to Re-Use Clay or dough consistency when heated when heated in microwave Makes molds fast and easily by pressing your part into the mold putty Rubber or silicone-like when cooled. Simply heat ImPRESive putty until dough/clay like in the microwave double boiler or in an oven (set no higher than 190F).

Composimold Impressive Re-Usable Mold Making Putty, 1 lb.

Impressive Re-Usable Mold Making Putty, 1 lb. : Arts, Crafts & Sewing

ImPRESSive Putty - A Review - The Blue Bottle Tree

Amazing Mold Putty

J-B Weld 40006 Wood Restore Premium Epoxy Putty Kit - 32 oz. : Tools & Home Improvement

Impressive Re-Usable Mold Making Putty, 1 lb. : Arts, Crafts & Sewing

Lowest Cost Reusable Mold Making Material Using the IMPRESSIVE PUTTY MIX

Mold Putty Silicone Mold Making Kit, Super Easy 1:1 Mix Mold Putty, 7/8 Lb (400 Grams), Makes Strong Reusable Silicone Molds

Impressive Putty (previously called ReMold Putty) is ComposiMold's newest reusable mold making material in a putty form. It can be applied directly to