Hong Kong Flag Patch
By A Mystery Man Writer
Last updated 18 Jun 2024
![Hong Kong Flag Patch](https://i.etsystatic.com/27092016/r/il/3af4bf/2977884385/il_570xN.2977884385_9ncp.jpg)
This Patches item by TravelStitchesCo has 10 favorites from shoppers. Ships from Canada. Listed on Dec 15, 2023
Iron on Flag Patch - Hong Kong Each sale supports my travels Post-Covid. Instagram/Facebook: Travelstitches Shipping Free within Canada can take up to 15 business days (untrackable) Shipping United States can take up to 20 business days (untrackable) Shipping Worldwide up to 30 days (untrackableable) Specs: 3.5cm by 6cm for Rectangle Patches Iron Instructions: Put a top cloth on top of the patch. Press the iron firmly to the patch and hold for 10 seconds as a test. It usually takes 20-25 seconds to fully melt the glue, but irons vary, so be careful and don’t burn or melt the fabric. If the glue isn’t fully melted or if you handle the patch while the patch is still warm, the patch may start to come off the fabric. If this happens, iron it on again. To prevent burning of the polyester, or patches and to get better adhesion: First, position the patch in the desired location and apply the iron to melt the glue. Then turn the material inside out and iron through the material against the underside of the patch. This allows you to see areas where the glue was not fully contacting with the material, get better heating and overall a better application. The patches should stay on much better. Also washing in delicate, or hand wash and laying flat, or clothes line to dry helps. You MUST let the Patch set for a few minutes until it is cool before you handle it so the glue can dry. Our patches have excellent adhesion that is superior to any other one inch iron-on patches we have tried. Once the patch is ironed on, it may not be possible to remove it without damaging the fabric. Patches can be ironed on most fabrics. They are often ironed on jersey sleeves, backs or fronts. The only problem you might experience is if you have a textured fabric that the glue can’t adhere to. In those cases or if you don’t want them to be permanent, you can put a few stitches in each one, or use fabric glue to hold it on. Patches probably won’t stay on stretchy material such as socks or head bands unless you sew them on with a thread. IMPORTANT: Don’t wash or dry the fabric that has patches glued onto it using extreme heat — hot water or an extremely hot dryer can soften the glue and cause the patches to come off the fabric. Wash on a warm or cool setting, and dry on a medium or lower setting — the higher the heat, the more likely it is that the patch will come off. After repeated washing and drying, the patches may come off. The best way to ensure this doesn’t happen is to use a needle and thread to put a stitch in the patch that secures it to the fabric — that way the patch won’t fall off and you can iron it back on. To put patches on ball caps and similar items: You will need to use a glue such as “Goop”, which can be purchased at Home Depot, Lowe’s and many stores; you will need to let the glue dry for as long as recommended (24 hours for Goop). Super Glue does NOT work well. NOTE that they may not stick to all items, and the glue you use will determine how well they stick and stay. Some leagues who re-use the jerseys from year to year do not want patches ironed on, and some leagues prohibit any type of emblem on the uniforms. If you are unsure of whether your league allows patches to be ironed on uniforms, check your league rules and be creative.
Iron on Flag Patch - Hong Kong Each sale supports my travels Post-Covid. Instagram/Facebook: Travelstitches Shipping Free within Canada can take up to 15 business days (untrackable) Shipping United States can take up to 20 business days (untrackable) Shipping Worldwide up to 30 days (untrackableable) Specs: 3.5cm by 6cm for Rectangle Patches Iron Instructions: Put a top cloth on top of the patch. Press the iron firmly to the patch and hold for 10 seconds as a test. It usually takes 20-25 seconds to fully melt the glue, but irons vary, so be careful and don’t burn or melt the fabric. If the glue isn’t fully melted or if you handle the patch while the patch is still warm, the patch may start to come off the fabric. If this happens, iron it on again. To prevent burning of the polyester, or patches and to get better adhesion: First, position the patch in the desired location and apply the iron to melt the glue. Then turn the material inside out and iron through the material against the underside of the patch. This allows you to see areas where the glue was not fully contacting with the material, get better heating and overall a better application. The patches should stay on much better. Also washing in delicate, or hand wash and laying flat, or clothes line to dry helps. You MUST let the Patch set for a few minutes until it is cool before you handle it so the glue can dry. Our patches have excellent adhesion that is superior to any other one inch iron-on patches we have tried. Once the patch is ironed on, it may not be possible to remove it without damaging the fabric. Patches can be ironed on most fabrics. They are often ironed on jersey sleeves, backs or fronts. The only problem you might experience is if you have a textured fabric that the glue can’t adhere to. In those cases or if you don’t want them to be permanent, you can put a few stitches in each one, or use fabric glue to hold it on. Patches probably won’t stay on stretchy material such as socks or head bands unless you sew them on with a thread. IMPORTANT: Don’t wash or dry the fabric that has patches glued onto it using extreme heat — hot water or an extremely hot dryer can soften the glue and cause the patches to come off the fabric. Wash on a warm or cool setting, and dry on a medium or lower setting — the higher the heat, the more likely it is that the patch will come off. After repeated washing and drying, the patches may come off. The best way to ensure this doesn’t happen is to use a needle and thread to put a stitch in the patch that secures it to the fabric — that way the patch won’t fall off and you can iron it back on. To put patches on ball caps and similar items: You will need to use a glue such as “Goop”, which can be purchased at Home Depot, Lowe’s and many stores; you will need to let the glue dry for as long as recommended (24 hours for Goop). Super Glue does NOT work well. NOTE that they may not stick to all items, and the glue you use will determine how well they stick and stay. Some leagues who re-use the jerseys from year to year do not want patches ironed on, and some leagues prohibit any type of emblem on the uniforms. If you are unsure of whether your league allows patches to be ironed on uniforms, check your league rules and be creative.
![Hong Kong Flag Patch](https://www.trendyapparelshop.com/cdn/shop/products/51fmXbxZCUL._AC.jpg?v=1619771319&width=1024)
Trendy Apparel Shop Hong Kong Flag Patch Retro Trucker Mesh Cap
![Hong Kong Flag Patch](https://libertymaniacs.com/cdn/shop/products/embroidered-patches-black-front-6270273d552ae_2000x.jpg?v=1651517459)
Black Bauhinia Hong Kong Independence Embroidered Patch - Liberty Maniacs
Hong Kong Colonial Flag Patch: Wear your pride on your sleeve! This morale patch is perfect for sticking onto tactical backpacks, milspec hats, and
![Hong Kong Flag Patch](https://m.media-amazon.com/images/I/81QeKxe0o8L._AC_UF894,1000_QL80_.jpg)
Cypress Collectibles - Hong Kong Colonial Flag Patch - Premium Embroidered Appliqué - China Country Velcro®-Brand Fasteners Patches - Dimensions: 3.5
![Hong Kong Flag Patch](https://patchpanel.ca/cdn/shop/products/3-x-2-laser-cut-canadahong-kong-split-flag-laser-cut-patch-patchpanel-284624_556x.jpg?v=1665796559)
3 x 2 Laser Cut Canada/Hong Kong Split Flag – PatchPanel
A-ONE -Hong Kong Flag Patch+Lapel Pin, Bauhinia Flag Metal Pin, Military Tactical Badge Iron on Sew on National Emblem NO.063A Red, White
![Hong Kong Flag Patch](https://m.media-amazon.com/images/I/81t3DqiuewL._AC_UY1000_.jpg)
A-ONE -Hong Kong Flag Patch+Lapel Pin, Bauhinia Flag Metal Pin, Military Tactical Badge Iron on Sew on National Emblem NO.063A Red, White
![Hong Kong Flag Patch](https://i.etsystatic.com/7352963/r/il/309d92/3435017087/il_570xN.3435017087_4i29.jpg)
Hong Kong Flag Patch - Denmark
![Hong Kong Flag Patch](http://backpackflags.com/cdn/shop/products/china-flag-patch-757600.jpg?v=1689082806)
China flag patch –
![Hong Kong Flag Patch](https://i.etsystatic.com/7955556/r/il/ace67a/2938185262/il_fullxfull.2938185262_dk4g.jpg)
Hong Kong Flag Embroidered Patch 12cm X 9cm
![Hong Kong Flag Patch](https://m.media-amazon.com/images/I/91tiarSfraL._AC_UF350,350_QL50_.jpg)
HONG KONG Flag Embroidered Iron-On Patch Military Tactical BLACK & WHITE Version
![Hong Kong Flag Patch](https://m.media-amazon.com/images/I/615WTrUutUL.jpg)
Cute-Patch [4 Pieces Set] Hong Kong Flag Full Embroidered Iron on Sew on Patch Five Petal Orchid Flower Emblem
![Hong Kong Flag Patch](https://i.etsystatic.com/7352963/r/il/6b0f6d/3387340074/il_fullxfull.3387340074_ozlt.jpg)
Hong Kong Flag Patch
![Hong Kong Flag Patch](https://shop.jkarmy.com/media/catalog/product/cache/a7db5aa0e6bef362de3fce8ac828e180/m/i/mil-irpt-083_01.jpg)
Infra Red Patch - Ranger Green HKSAR ( Hong Kong ) Flag Type B ( Free Shipping ) ( RG )
![Hong Kong Flag Patch](https://irishpatches.com/cdn/shop/products/UKflag_cover_large.jpg?v=1442891659)
BRITISH-CONTROLLED HONG KONG FLAG PATCH – IRISH PATCHES
![Hong Kong Flag Patch](https://images-na.ssl-images-amazon.com/images/I/71xCadhp5JL._AC_UL600_SR600,600_.jpg)
Cypress Collectibles - Hong Kong Flag Patch - Premium Embroidered Appliqué - Asian Country Iron On Patches - Dimensions: 3.5 x 2.5 : Arts, Crafts & Sewing
Recommended for you
-
Pirate Flag Patches PVC Velcro Multiple Sizes Morale18 Jun 2024
-
Tactical USA Flag Patch with Detachable Backing - Blue Line18 Jun 2024
-
Reverse US Flag Patch w- Velcro – Mil-Bar18 Jun 2024
-
American Flag Embroidered Tactical Patch Gold Border w/Velcro Brand Fastener18 Jun 2024
-
USA Flag Velcro Patch18 Jun 2024
-
Thin Blue Line United States Flag Patch Set - Velcro18 Jun 2024
-
USA Flag Patch 3.5 x 2- Velcro - Red White Blue Gold18 Jun 2024
-
Embroidered IR Puerto Rico PR Flag Hook Loop Patch Backing Emblem Fastener Badge18 Jun 2024
-
Sweden Flag Patch W/ VELCRO® Brand Fastener Gray & Black Tactical Version18 Jun 2024
-
AMERICAN FLAG EMBROIDERED PATCH CAMO BROWN TAN USA US w/ VELCRO18 Jun 2024
You may also like
-
Glowing Yarn, 50m DIY Glow in The Dark Yarn for Crochet, Soft Multi-Colors Sewing Supplies Scrubby Yarn for Beginners18 Jun 2024
-
Wall Patch Repair Kit-drywall Repair Kit-safe Wall Mending Agent For Plaster,ceiling&sheet Rock-dry18 Jun 2024
-
Pack of 24, 72, 240 Paper Labels, Vintage Christmas Caroller18 Jun 2024
-
Upholstery Fabric, Turkish Fabric By the Meter, By the Yard, Pale18 Jun 2024
-
DIY Confetti Ornament Kit - The Confetti Bar18 Jun 2024
-
Cox Hardware and Lumber - Fiberglass Insulation Roll R-11 3-1/2 In x 23 In18 Jun 2024
-
Color Your World 5816 Walnut Brown Precisely Matched For Paint and Spray Paint18 Jun 2024
-
Medieval Witch Stickers,Witchy Stickers,Vintage Aesthetic Stickers for Water Bot18 Jun 2024
-
Bowitzki Unicorn Face Paint Stencils for kids 20*20cm 5 Shapes18 Jun 2024
-
Toyshine Pink Unicorn Hardtop Pencil Case with Compartments - Kids Lar18 Jun 2024