Siser Metallic Mirror HTV – 12″x20″ Sheets – Silver – CSDS Vinyl

By A Mystery Man Writer

Last updated 30 May 2024

Siser Metallic Mirror HTV – 12″x20″ Sheets – Silver – CSDS Vinyl

Metal Heat Transfer Viny Add a Gleaming Chrome Effect to Your Designs! Siser Metallic Heat Transfer Vinyl is perfect for adding a chrome look to your designs. This mirror like material is unlike anything you’ve seen before! Available in gold and silver, Metallic’s rich and shiny finish stands out from the crowd. Metall

Metal Heat Transfer Viny

Add a Gleaming Chrome Effect to Your Designs!

Siser Metallic Heat Transfer Vinyl is perfect for adding a chrome look to your designs. This mirror like material is unlike anything you’ve seen before! Available in gold and silver, Metallic’s rich and shiny finish stands out from the crowd. Metallic looks great on caps, tote bags, and home décor such as pillow covers.
Please note that Metallic is a unique product and that cracking and delamination may occur after washing. The results are not predictable.

Metallic is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.

Due to technological limitations, any colors shown are only representative of our products color and/or pattern. We can only guarantee that product colors will match their respective manufacturers’ color chart/swatch. Please test products and seek appropriate approvals prior to use in production.

Please allow for a ( /-) 1/2? error on all measurements.

CUTTER SETTINGS

Cricut:• Blade: Standard • Setting: Iron-on

Silhouette Cameo:• Blade: Standard, 2 • Material: Heat Transfer, Smooth • Speed: 8 • Force: 6

Scan N Cut:• Blade: Standard, 2 • Cut Speed: 1 • Cut Pressure: 3

Roland GS/GX-24:• Blade: 45° • Gram Force: 80-90 • Offset: .250 • Speed: 30-50 cm/s

Graphtec:• Blade: 45° • Gram Force: 8-9 • Tool: CB09U 0 • Speed: 30 cm/s

Application instructions

Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Kraft paper or non-stick cover sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier cold

Application Instructions (heat press) • Cut in reverse • Weed excess material • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier cold