The Gelcoater GUPS Disposable Paint Cups System 12oz/350mL Case of 50

By A Mystery Man Writer

Last updated 06 May 2024

The Gelcoater GUPS Disposable Paint Cups System 12oz/350mL Case of 50

The Gelcoater GUPS Disposable Cup System all in one material prep system. Measure, mix, catalyze, filter and spray. Compatible with Gelcoater GUPS adapters & 3M PPS 16000 series. 1 full case = 1 x 12oz/350mL hard cup, 1 pce collar, 50 pcs cup liners, 50 pces lids with built-in 125 micron filter, 21 pces sealing caps.
COMPATIBLE WITH VIRTUALLY ANY SPRAY GUN! (SEE ADAPTER CHARTS) ALSO COMPATIBLE WITH FIRST GENERATION 3M PPS 16000 SYSTEM The Gelcoater GUPS Disposable Cup System is an all in one material preparation system that allows you to measure, mix, catalyze, filter and spray without needing to clean your cups. You can even prepare multiple cups of material for rapid, successive spraying. The GUPS System vastly reduces clean up time and cleaning solvent consumption therefore saving time AND money! Each full case comes with 1 hard outer cup and collar (for securing lids to hard cup), 50 lids with built-in 125 micron filter, 50 soft cup liners and 21 lid caps for sealing the assembled cups for temporary storage (storing of catalyzed material is not recommended). Directions for use: 1. Place a soft plastic liner inside the reusable hard cup. 2. Pour your material into the cup and mix if necessary. 3. Snap on a lid. 4. Screw the locking collar to the lid and cup. 5. Affix the appropriate adapter to your spray gun (see our Adapter Compatibility Chart). 6. Attach the cup assembly to the adapter on your gun and spray your job. Features: All-in-one material preparation system allows you to measure, mix, catalyze, filter and spray without the need to clean your cups! Accurately pre-measure your material ahead of time in the graduated cup instead of in the middle of the job and rapidly spray successive batches! No need for separate mixing cups and filters saves money and time. Spray large amounts of material quickly by pre-measuring into as many cups as you need without having to clean any of them! Reduce contamination with 125 micron filters built into the lid! Contamination is further reduced by using a fresh lid and liner for each spray! Vastly reduce clean up time by eliminating the need to clean your cups! With no cup to clean you vastly reduce the amount of solvent used in your cleanup! Specifications: Graduated hard cup: 12oz / 350mL (14oz / 425mL maximum capacity) Soft liners for hard cup: 12oz / 350mL (14oz / 425mL maximum capacity) Cup lids: 125 micron filter (built-in) Compatible with Gelcoater GUPS adapters & 3M PPS 16000 series (1st Gen.). Package Contents: 1 full case = 1 piece 12oz/350mL hard cup, 1 piece collar for hard cup, 50 pieces cup liners, 50 pieces lids with built-in 125 micron filter, 21 pieces sealing caps for lids.

Gel Coat Cup Gun small / medium molds & parts. In stock

Gel Coat & Resin Spray Cup Gun : TAP Plastics

Disposable Paint Spray Gun Cups Liners and Lid System, 50 Pack Medium Size 13.5 Ounce (400ml) Kit - 50 Cup Liners, 50 Lids with 190 Mic Strainer, 1 Hard Cup with Retainer Ring and 20 Plugs : Automotive

COMPATIBLE WITH VIRTUALLY ANY SPRAY GUN! (SEE ADAPTER CHARTS), ALSO COMPATIBLE WITH FIRST GENERATION 3M PPS 16000 SYSTEM, The Gelcoater GUPS

The Gelcoater GUPS Disposable Paint Cups System 12oz/350mL Case of 50

Gel Coat Cup Gun small / medium molds & parts. In stock

Disposable Paint Spray Gun Cups (190 Micron) 50 Lids 50 Liners 1 Hard Cup 1 Collar - Size 100ML-3OZ / 200ML-6OZ / 400ML-13.5OZ / 600ML-22OZ / 800ML-28OZ / Paint Supplies - Graduated Measurements : Automotive

Sagola Disposable Paint Cups (DPC) Easily Swap Out Your Cups (600ml, 125µm Filter) : Automotive

32oz Gelcoat Gun Double Poly Paper Containers, 32 Oz, White. Gel Coat Gun Hd Plastic Cups Professional Grade Cup Gun Cup, Sprays Gelcoat 32oz Gelcoat Gun DoublePoly Paper Containers (20pcs)