Evercoat 105685 8 oz PVA Mold Release

Use as an air-inhibiting agent for Gel Kote. Spray a light mist over the catalyzed Gel Kote to fully cure and eliminate the tacky feel. Can be used as an excellent mold release agent.

Polyvinyl Alcohol

PINTAR #ST7514, PHENOLIC RESIN ROLLER REFILL 7.5/190MM. The Chandlery

evercoat

Fiberglass Evercoat PVA Mold Release 8-OZ : Pva

Fibre Glass-Evercoat Co Mold Release Agent, 8-Ounce, Cleaners

Evercoat 105685 8 Oz PVA Mold Release

Use as an air-inhibiting agent for Gel Kote. Spray a light mist over the catalyzed Gel Kote to fully cure and eliminate the tacky feel. Can be used as an excellent mold release agent.

Evercoat 105685 8 oz PVA Mold Release

PVA, or polyvinyl alcohol, should be used with our #1016 Partall Wax for the easy release of parts from a mold. Wax should be applied to the mold, 3–4 layers thick, and buffed to a high gloss. Once the final layer of wax has dried, PVA should be applied with the following considerations:PVA can be brushed on, but for best results, apply with a spray gun, 12–18 inches away from substrate. Generally, apply in three layers: the first, a thin mist, allowing 10-15 minutes to dry completely.

Fibre Glast - PVA Release Film

Evercoat Polyvinyl Alcohol 8 oz.

Fiberglass Evercoat PVA Mold Release 8-OZ : Pva Mold

Evercoat 105685 8 Oz PVA Mold Release

Evercoat Formula

New And Improved Formula Package Height Of The Item Is 2.25 Package Length Of The Item Is 6.5 Package Width Of The Item Is 2.25

Fiberglass Evercoat PVA Mold Release 8-OZ

Evercoat 105685 PVA Mold Release 8 oz 105685