High Performance Epoxy Resin and Fumed Silica Thickening Agent and

By A Mystery Man Writer

Last updated 30 May 2024

High Performance Epoxy Resin and Fumed Silica Thickening Agent and

Get Both the 1.5 gallon kit of High-Performance Crafters Coating Epoxy AND the 1 gallon of Crafters Fumed Silica and a 2oz bottle of Red, White, and Blue Liquid Pigments. The High-Performance Epoxy Resin is UV Protected with hindered amine light stabilizers that slow the epoxy resin degradation from UV light AND the C

Get Both the 1.5 gallon kit of High-Performance Crafters Coating Epoxy AND the 1 gallon of Crafters Fumed Silica and a 2oz bottle of Red, White, and Blue Liquid Pigments.

The High-Performance Epoxy Resin is UV Protected with hindered amine light stabilizers that slow the epoxy resin degradation from UV light AND the Crafters Fumed Silica is a 1 Gallon Kit.

This high-performance epoxy resin started as an epoxy resin used for boat restoration and evolved into a high-performance epoxy resin capable of withstanding chemicals, acids, corrosion, rust, wind, salts, and of course, water.

No blushing and no chalking over time

UV resistant with hindered amine light stabilizers (reflect UV Light)

ease of use mix ratio (2:1) by weight or volume.

Heat resistant up to 180F.

Strong enough for industrial and civil engineering level strength

Commonly used for the following types of Applications:

Outdoor tables
corrosion-resistant coatings
Boat repair and restorations
Tank Linings
Industrial coatings and flooring
Garage Floor coatings
Weatherproofing
Surfboard and Paddleboard repairs
High Performance

This formula cures much faster than the typical epoxy resin. A fresh pour can be tack free within 2 hours. We still recommend not touching the pour for 7-10 days to ensure full adhesion.

Advantages:

low viscosity (800cps.)
extra long pot-life of 60 minutes.
faster cure times of 24 hours.
0% VOC's and virtually no smell
Tensile Strength, 7500 PSI before cracking

We include part A (resin) and part B (hardener) and instructions with the kit.

Crafters Fumed Silica Thickening Agent is commonly used to thicken epoxy resin, paints, and similar liquids.

A trade name commonly used is Cabosil Fumed Silica. This jug contains approximately 1 gallon of the Fumed Silica powder. Simply add it to the epoxy resin, paints, or liquids and stir by hand until you reach the desired thickness.

Commonly used when repairing cracks with epoxy resin.

Low density
Extremely high surface area
Three-dimensional particle structure
Increases viscous properties of liquids
Non-sagging properties

Perfect for patching holes, filling seams & cracks, filling voids, and thickening liquids in the high-performance boating industry. Also found to be used to assist to create custom projects, scenes, and set designs.

Once cured it can be fully machined and sanded after 24 hours.

1 Gallon jug with easy on and easy off screw-on lid.

AND

Three liquid concentrated epoxy resin liquid pigments.

These liquid pigments will turn any epoxy resin red, white, blue or into a mix if you mix the colors.

Tired of using powders or tints?

This will turn the epoxy resin to your desired color. This is NOT like a tint that runs or fades in large amounts of epoxy resin.

Keep pigment-to-resin ratio below 5% or you may experience improper curing.

2-ounce bottles of each color shown is included. Red, White, and Blue.

This concentrated pigment makes life real easy by simply stirring directly into your resin.