Adhesive - Renia - Aquilim 315 - Contact Cement – mzz T rzz

Renia Aquilim 315 is a water-based contact cement that bonds leather, rubber, EVA, PU sheets, cork, plastazote, etc.  It has a high bonding strength and is easy to apply. Can be used for spray application variant available as well. Renia Aquilim is free of Toluene, MEK, and 100% free of VOCsIt is completely odorless an
Renia Aquilim 315 is a water-based contact cement that bonds leather, rubber, EVA, PU sheets, cork, plastazote, etc.  It has a high bonding strength and is easy to apply. Can be used for spray application variant available as well. Renia Aquilim is free of Toluene, MEK, and 100% free of VOCsIt is completely odorless and non-toxic.Clear glue line, for a clean and professional appearance. Long shelf-life, no phase separation, no clumps, no stirring, shaking or thinning necessary. Open time: 1 – 60 min Sizes: 16oz, 32oz, 0.8 Gallon (upon request) Made in Germany **During colder months (November-March) there is the risk of glue freezing in transit. I will ship if ordered but it will be at your own risk. DIRECTIONS: Make sure surfaces are clean and rough before bonding.  Coat absorbent surfaces twice if necessary.  Observe drying times: Aquilim turns clear when dry.  Bond within open time, or activate with heat afterwards.  Don't allow Aquilim to freeze. Two sided application:Two sided application possible for all materials.Apply thin coat on both sides and let the adhesive dry (10–20 minutes or 2–3 minutes on leather, depending on layer thickness, can be accelerated by heating). Join parts within open time or after heat activation and press with at least 1 bar. One sided application:One-sided application only if one side is absorbent/permeableApply slightly thicker coat on one side and immediately lay absorbent material onto wet adhesive layer. Press materials together and allow several hours of drying/curing time. Leather to leather: Instant bond with one-sided application, adhesive needs to penetrate into the fiber structure. Sewing/stitching is possible after 30–60 minutes. **Not ideal on PE/PP material. *Make sure to use in a well ventilated area. Click here to view or print full tech sheet. The Renia GmbH was founded in the year 1930 and has existed since then as an independent family company outside of any affiliated group, now led by the third generation. 

Aquilim 315 - professionell Leather Glue. Made in Germany. For all kind of leather works and repairing.

Aquilim 315 Leather Glue 500g Solvent-Free for Professional Use Renia Germany

Adhesive - Renia - Härter C (blue) – mzz T rzz Shoemaking Materials

AQUILIM 315 Water-based - Glue & Brush - Leather House - Fur, Buckles, leathercraft, tools

Renia Aquilim 315 - 500ml – Lonsdale Leather

Renia Aquilim 315 Cement - Montana Leather Company

Leather Adhesives – Traditions Leathercraft LLC

Leather Adhesives – Traditions Leathercraft LLC

Renia Aquilim 315 Water-Based Contact Adhesive

Leather Adhesives – Traditions Leathercraft LLC

Renia - Aquilim 315

Renia Aquilim 315 Odorless Water Based Contact Cement for Leathercraft with Ultra Hold and Flexible Adhesive That Dries Quickly: : Industrial & Scientific

Leather Adhesives – Traditions Leathercraft LLC