Machine Woven Cane Webbing 1/2 – Restoration Supplies

Cane webbing is pre-woven cane made by machine from strands of chair cane. It is primarily used for re-doing cane chairs that have a groove around the seat opening rather than drilled holes.
Cane webbing (also called machine-woven cane, pre-woven cane or sheet cane) is cane woven by machine from strands of chair cane. It is sold by the inch & primarily used for re-doing cane chairs that have a groove around the seat opening rather than drilled holes. **If your chair seat (or back) has holes drilled into the wood around the outside edge of the large hole, you will need to do hand weaving. Click here for hand weaving supplies. The mesh size on the traditional pattern is determined by measuring the distance from the center of one hole to the center of the next hole. If you are unsure of the size of your cane webbing, please send us a sample and we will match it. Instructions for installing the cane webbing will be included with your order. We currently carry 16 & 18 wide rolls. This pattern has a 1/2 measurement from center of one hole to center of the next. Please indicate the number of inches (length) you need in the quantity drop down option. Price is per inch (length). To determine the amount of webbing required; measure from the outside edges of the groove at the widest point, front to back and side to side & add 2. For example: if your seat measures 16” x 15” from groove to groove then you need a 18” x 17 piece of cane. So you would order 17 of the 1/2 x 18 size.  
Explore for top-quality antique furniture restoration products. Over 40 years of expertise. Transform your restoration dreams today!

Cane webbing (also called machine-woven cane, pre-woven cane or sheet cane) is cane woven by machine from strands of chair cane. It is sold by the

Machine Woven Cane Webbing 1/2

Fine 1/2 Cane Webbing - HH Perkins Rattan Sheets

Pre Woven Cane

Use pre-woven cane webbing for chair seats that have a groove around the perimeter of the chair. This kit includes 1 piece of 3/4 Medium Open Hexagonal Pattern Cane webbing measuring 18x18 inches, 3 different sizes of spline in 72 coils (#7 for 1/8 groove, #8 for 3/16 groove and #9 for 1/4 groove), a set of wooden wedges to press the cane into the groove and instructions to do the project.

Pressed Cane Webbing Kit 1/2 Fine Open Mesh with Splines, Wedges and Instructions

Restorers 5/8 Pre-Woven Cane Hobby PackWe carry the hard to find products for chair caning like this 5/8 Pre-Woven Cane Hobby Pack. This Hobby Pack is pre-cut to a convenient 24 x 24 size. Pre-Woven cane webbing is used when a groove surrounds the caned area for re-seating cane chairs. Caning can also be used on cabinet doors. Pre-woven cane mesh is held in place in the groove by spline and glue. Both machine pre-woven cane webbing and unwoven chair cane are made from the same material.

Restorers 1/2 Pre-Woven Cane Hobby Pack | Unfinished | Chair Components

Machine Woven Cane Webbing 1/2 – Restoration Supplies

Radio Net Pre-Woven Cane - 18 Or 24 WideMinimum order of 12 required.Radio net cane webbing is used when a groove surrounds the caned area. On projects where holes are drilled around the outside edges of the area to be caned, unwoven chair cane must be used. Both machine pre-woven cane webbing and unwoven chair cane are made from the same material.

Pre-Woven Cane - 7/16 inch Mesh

Size: 18 wide, 1/2 fine open mesh. This is the most commonly used pattern. To determine what length of cane net to order, measure one pattern

Fine Open Mesh 1/2 Pre-Woven Cane or Cane Webbing | Wide 18 | Sold by The Running Foot | Furniture Webbing, Wood Cane Supplies, Caning for Chair

Pre Woven Cane & Rattan Mattting for Chair repair & Cabinet doors

Cane Webbing Kit

Size: 18 wide, 1/2 fine open mesh. This is the most commonly used pattern. To determine what length of cane net to order, measure one pattern

Fine Open Mesh 1/2 Pre-Woven Cane or Cane Webbing | Wide 18 | Sold by The Running Foot | Furniture Webbing, Wood Cane Supplies, Caning for Chair

Cane Webbing Kit