CMX® Surface Prep – Mothers® Polish

Proper surface prep before applying any ceramic coating, sealant or wax is paramount to ensure optimal adhesion and a lasting bond. Old waxes, stubborn oils, grease, fillers and even that pesky polishing residue are no match for Mothers® CMX® Surface Prep. Biodegradable grease-cutting surfactants and solvents dig deep, dissolving oils and lifting away surface-clinging contaminants. This safe but effective, pH neutral cleaner is so versatile it can be used on virtually every exterior surface of your vehicle, including paint, glass, trim, wheels, tires and more. It can also be safely used in body shop environments thanks to its silicone-free formula. Simply spray on and wipe off, CMX® Surface Prep will do the rest, quickly flashing off, leaving a perfectly clean, residue-free and anti-static/dust-resistant surface, ready for coating.

U-Pol Products 0796 Clear CLEAR#1 High Gloss Coat 345g/12.2oz : Automotive

CMX® Ceramic Trim Restore & Coat – Mothers® Polish

MOTHERS POLISH 01224 MOTHERS CMX SURFACE PREP 24 OZ

U-Primer 130 - NPT

U-POL 0741V Acid#8 Etch Primer Gray Aerosol, 13 Fl Oz. : Automotive

Mothers 01224 CMX Surface Prep, 24 oz. : Automotive

Proper surface prep before applying any ceramic coating is paramount to ensure optimal adhesion and a lasting bond. Old waxes, stubborn oils, grease,

Mothers CMX Ceramic Surface Prep, 24 Ounce

U-Pol Acid 8 1K Acid Etch Primer U-Pol Acid 8 1K Acid Etch Primer is used for priming bare steel, galvanized, aluminum, and many other metals for adhesion and corrosion resistance. This acid etch primer is quick drying and easy to use. Acid 8 is chromate free, anti corrosive, ad infra-red compatible. Directions for Using U-Pol 1K Acid Etch Primer: Sand the metal with 320 grit sand paper. Use a good quality grease and wax remover to degrease the metal prior to priming.

U-POL Acid Etch #8 Primer, Gray

U-Pol Acid 8 1K Acid Etch Primer U-Pol Acid 8 1K Acid Etch Primer is used for priming bare steel, galvanized, aluminum, and many other metals for adhesion and corrosion resistance. This acid etch primer is quick drying and easy to use. Acid 8 is chromate free, anti corrosive, ad infra-red compatible. Directions for Using U-Pol 1K Acid Etch Primer: Sand the metal with 320 grit sand paper. Use a good quality grease and wax remover to degrease the metal prior to priming.

U-POL Acid Etch #8 Primer, Gray

CMX Car Polish & Coating Products