Alumilite Clear

Alumilite Clear is a crystal clear resin that is easy to use and great for a wide variety of clear casting applications. Its low viscosity and 1:1 mix ratio by weight makes it extremely easy to use. Vacuum or pressure is recommended to achieve 100% bubble free castings but minimal bubbles can be achieved by slowly mixi
Alumilite Clear is a crystal clear resin that is easy to use and great for a wide variety of clear casting applications. Its low viscosity and 1:1 mix ratio by weight makes it extremely easy to use. Vacuum or pressure is recommended to achieve 100% bubble free castings but minimal bubbles can be achieved by slowly mixing and pouring the resin. It offers superior polishability than other clear resins and able to achieve maximum shine in your finished parts. Alumilite Clear has a 7 minute work time and a 90 minute demold time and is fully cured in 5 to 7 days. It is specially made to produce crystal clear castings for wood turning, prototyping, auto restoration and other applications where clarity is paramount. Alumilite Clear must be mixed 1:1 by weight. Off ratio mixing may produce hazy or frosted parts. High impact Convenient 1:1 mix ratio (by weight) Thin viscosity for easy mixing Easily dyed or pigmented Can be turned, drilled, sanded, and polished to high gloss Off-mixing may produce hazy or frosted parts Minimal bubbles can be achieved by slowly mixing and pouring Pressure casting is recommended for bubble-free results Note: The clarity of resin will shift from batch to batch based on the clarity of incoming raw materials. In most cases, this will not affect product unless used over white backgrounds. To use: Measure out equal parts of side A and side B by weight mixing thoroughly to combine both sides. Add color with dyes and powders to create unique, custom pieces. Pour Alumilite clear into your mold within the work time to ensure a good casting. We recommend using a pressure pot to ensure bubble free castings keeping your project under 40 psi of pressure during the cure time.

Alumilite 32oz Amazing Clear Cast Plus Epoxy Casting Resin

i5.walmartimages.com/seo/Alumilite-Clear-Casting-R

Alumilite Clear and Clear Slow Resin, Urethane Resin, great for woodturning

DIY Resin Blanks with Alumilite Clear Slow

Amazing Casting Products

The Amazing Clear Cast PLUS by Alumilite is a clear casting epoxy resin that produces a clear, glossy finish. Use this clear resin for coating or finishing applications such as bar tops, countertops, flat artwork surfaces, steel tumblers, and more. Amazing Clear Cast resin is a two-part epoxy resin, that mixes 1:1 by volume or weight. The PLUS comes from the enhanced UV protection in this formula. This resin can be colored with Alumilite dyes, alcohol inks, or other non-water base colorants.

Amazing Clear Cast Plus Epoxy Kit 16oz

Alumilite Clear Casting Resin - 1 lb Kit

, Alumilite Clear is a crystal-clear resin with a longer (twelve-minute) open time, making it convenient to use for large casting and turning

Alumilite Clear 2 LB kit AL10045

Alumilite Amazing Epoxy Starter Kit 8oz

Alumilite High Gloss Amazing Clear Cast Plus Epoxy W/ Enhanced UV Protection