Alu-Cab Tilting Fridge Slide (Large Fridges) — Mule Expedition Outfitters

By A Mystery Man Writer

Last updated 26 May 2024

Alu-Cab Tilting Fridge Slide (Large Fridges) — Mule Expedition Outfitters

Alu-Cab’s new Tilting Fridge Slide now operates as a straight pull out slide, and it has the option to tilt. This means you have the advantage of a fridge slide that runs on stainless steel runners with sealed stainless-steel bearings. This product offers maximum strength with the ability to carry greater loads, with g

MULE Expedition Outfitters Four Wheel Camper ARB Awning Brackets

NOTE: These brackets are now STAINLESS STEEL and no longer the mild steel with black powder coat. Stainless is stronger, won't rust and no powder coat means no possibility of scratching and rusting.

We designed and manufactured these awning brackets specifically to mount an ARB 8' (ARB Part # 814410) awning to the jack brackets on slide-in style Four Wheel Campers and Project M's.

To date, they have only been tested on the Fleet and Hawk camper and only with the ARB brand awning. Several other awning brands may have similar mounting tracks but we have not tested them and cannot guarantee compatibility.

These brackets DO NOT WORK on ANY of the flatbed Four Wheel Camper.

The brackets pivot using a clamp to allow for opening and closing the roof latch and tucking in the canvas pop-top if required while closing the roof. This allows for a simple bolt-on installation with no drilling required.

The mounting kit includes:

2x stainless steel brackets with quick release cam adjusters

Special Notes:

Hardware to mount the awning to the brackets is not included
Hardware for attaching to the camper is included with your camper jacks OR,
If you don't own the camper jacks, this hardware can be purchased seperately.

These heavy-duty jack bracket extensions are made in-house at MULE out of 3/16 steel specifically to match up with the jacks and jack brackets on the Four Wheel Campers. These extensions are often required for wider trucks, trucks with rock sliders or wider steps, fender flares, etc. Typically only one pair is needed for the forward jacks.

Sold as Singles (1 bracket)

The heavier duty steel vs factory aluminum extensions inhibits flex concerns on heavier campers.

Made of 3/16 Bare Steel or Stainless Steel
Holes line up with Four Wheel Camper jacks and jack brackets,
Bolt holes may not line up to older camper brackets.
Made in the USA
HARDWARE NOT INCLUDED. Requires 3/8x1.25 grade 5 or higher bolts, nuts and washers. 3 bolts and nut, 6 washers per bracket.

Note: bare steel will rust. These extensions are not meant to be left on the camper unless they are painted or powder-coated.

Alu-Cab HD Load Bars provide the ultimate versatility for mounting Alu-Cab products such as the Expedition III rooftop tent or Shadow Awn or for carrying more gear on your Explorer Canopy or Expedition III rooftop tent.

Please Note: Load Bar Endcaps are included with the feet.

Length Recommendations:

1450mm Length

Explorer Canopy Roof

Khaya Camper Roof

Canopy Camper Roof

Expedition III Base

Wood Box Base

1250mm Length

Expedition III Rooftop Tent Top

Explorer Canopy Roof Top (W/O RTT)

Wavian 20 Liter (5.3 Gallon) Jerry Cans.

These leak-proof steel fuel cans come directly from Wavian, the factory that has supplied many NATO countries for over 75 years, and are the highest quality jerry cans on the market today. Rigorously tested, they boast a number of features, including 0.9 mm steel walls, an interior rust-proof Rezol lining, internal breather pipe for splash-proof pouring, a three handle configuration for easy carrying, a Leak-proof bayonet closure, and a locking pin for the cap.

Wavian currently produces the only EPA, CARB, and DOT approved steel fuel cans that are 100% legal in all 50 US states. Includes spout and an adapter for vehicles with smaller filler receivers.

Available in OD Green, Black, Yellow, and Red.

OD GREEN IS CURRENTLY ON BACK ORDER STATUS. IF YOU ORDER GREEN WE EXPECT TO FILL YOUR ORDER BY MID TO LATE AUGUST.

Note: the lining of the fuel can will react with water, these cans are made for fuel only. For water storage, check out our food-grade water cans.

Can Features

Made out of 0.9mm cold rolled steel.
Unique wide channel breather and smooth pouring spout.
Lined to prevent rusting with gasoline, water, and alcohol resistant coating.
The cap has a locking pin (international patent) to ensure it cannot be opened accidentally.
The bayonet closure is completely leak-proof with the can in any position.
Three-handle configuration for easy grabbing and carrying of multiple cans.
Manufactured and tested to comply with Australian Standards – AS2906, Swedish Standards – SP, German Standards – TUV/GS, and UN Dangerous Goods.
EPA and CARB certified, built to ASMT, NFPA, and DOT standards.
OSHA compliant.
Approved and fully legal for sale in all 50 states.

Spout Features

Works on most gasoline vehicles.
Works on most diesel and equipment tanks.
Fast flow rate.
Leak-proof.

Dimensions (L x W x H in inches)
20L: 6½ x 13½ x 18½

Weight
20L: 12 lbs

With double locking pins, it is secured firmly in place when locked in position – with no risk of the fridge slide breaking free when the road gets rough.

The fridge slide allows easier access when the fridge is positioned at height. It also helps to clear the canopy or back doors when there isn’t space to open the lid. Built from both Stainless Steel and Aluminium, this tilting fridge slide offers good strength without adding excessive weight.

External dimensions: 863mm x 585mm

Usable dimensions: 800mm x 500mm

Weight: 24 lbs

This tilting fridge slide fits the following fridge freezers: