Heat Shrink Tube Kit With A Hot Air Gun (110v Us Plug) 2:1 - Temu

Heat Shrink Tube Kit With A Hot Air Gun (110v Us Plug) 2:1 - Temu

2:1 Shrinkable Heat Shrink Tubing Set With A Portable - Temu

Heat Shrink Tubing Kit 2:1 Automotive Industrial Electrical Solder

Hot Air Heat Gun With Heat Shrink Tubes Kit Electric - Temu

2:1 Shrinkable Heat Shrink Tubing Set With A Portable - Temu

2:1 Shrinkable Heat Shrink Tubing Set With A Portable - Temu

Hot Air Heat Gun With Heat Shrink Tubes Kit Electric - Temu

Small Tiny Mini Heat Gun Hot Air Gun Kit - Temu

Heat Shrink Tube Kit With A Hot Air Gun (110v Us Plug) 2:1 - Temu

Hot Air Heat Gun With Heat Shrink Tubes Kit Electric - Temu

Heat Shrink Tubing - Temu

Heat Shrink Tube Kit With A Hot Air Gun (110v Us Plug) 2:1 - Temu

Features: Can be used to heat relief powder and shrinkable sheets. Keeping 3-5cm distance from work and about a 45-degree angle to heat until it is completed. After completion, use the heat gun at a high temperature to blow for a few minutes. It not only can add its hardness, but also its brightness. The temperature cannot adjustable, in theory, it can reach at 200 degrees within a few seconds. Do not work over 10 minutes. Be careful when using the hot air gun.

Okeba 110V 300W Heat Gun for 18650 Wrap & Heat Shrink Tubing Temperature DIY