GEN2 3-MOLD KIT: 45, 25, AND 10/5 LBS – Caveman Weights
By A Mystery Man Writer
Last updated 29 May 2024
Our weight plate molds are thickerstrongerbeefier. A deeper mold design makes it easier to get accurate weight on your finished product. Our Caveman molds are made from durable ABS plastic and can be reused again and again. Centering Rings are designed to fit 2” or 1” PVC sleeves. These molds are designed to hold
Our weight plate molds are thickerstrongerbeefier. A deeper mold design makes it easier to get accurate weight on your finished product. Our Caveman molds are made from durable ABS plastic and can be reused again and again. Centering Rings are designed to fit 2” or 1” PVC sleeves. These molds are designed to hold 45/25/10 pounds of concrete. To ensure accurate product weight, mix extra concrete and pour it level with the top of your mold. You may also measure out the desired weight of concrete by using a bathroom scale. Your Purchase Includes: (QTY 1) 45lb Olympic Weight Plate Mold (QTY 1) 25lb Olympic Weight Plate Mold (QTY 1) 10/5lb Olympic Weight Plate Mold (QTY 2) Small 1” Plastic Sleeves for 10/5lb molds (QTY 10 ) Large 2” Plastic Sleeves for all Caveman mold weights (QTY 6) Small Metal Reinforcement Rings for 10/5lb molds (QTY 2) Medium Metal Reinforcement Rings for 25lb mold (QTY 4) Large Metal Reinforcement Rings for 35/45lb molds Product Dimensions: 45lb weight plate mold= 17.7” x 2.5” 25lb weight plate mold= 13.2” x 2.5” 10/5lb weight plate mold= 8.5” x 2.5” Items Needed to Complete Your Project Mixing Container Hot Glue Gun w/ Glue Sticks Concrete Premix INSTRUCTIONS & TIPS Place the weight plate mold on a FLAT and LEVEL surface. Use hot glue to attach the 2” plastic sleeve to the center of the mold. Position over dimple in center of the mold. Mix together concrete and water. Do NOT use Quick-dry Concrete. Pour the concrete into the mold. Spread evenly and remove any concrete from the plastic sleeve in the center. Add metal reinforcement into middle of your concrete pour. Twist weight plate mold back and forth to remove any air bubbles. This will also level the concrete and make certain the weight is distributed evenly throughout your weight. Demold after 24-48 hours. For easier removal, spray the inside of your mold with cooking spray prior to pouring concrete. Your Caveman Weight is now ready to use! *IMPORTANT!* Make certain to add steel reinforcement to your weights! If your weight cracks, the steel will help to keep it together. TIPS Your concrete should be the consistency of “mashed potatoes” when pouring into the molds. Adding additional water makes the concrete flow better, but it makes the concrete weaker and less durable. Make certain to pour your concrete level with the top of the mold. This will ensure an accurate weight with your finished project. You may also measure out the correct weight of concrete with a bathroom scale. Use hot, soapy water to clean your molds for reuse. Denatured alcohol or Isopropyl will remove hot glue. You may paint your Caveman Weights after 5 days. Coating with bedliner or Flex Seal will make your cement weights more rugged and increase durability. Follow us on Instagram @cavemanweights for more tips and design ideas.
- Our weight plate molds are thickerstrongerbeefier.
- A deeper mold design makes it easier to get accurate weight on your finished product.
- Our Caveman molds are made from durable ABS plastic and can be reused again and again.
- Centering Rings are designed to fit 2” or 1” PVC sleeves.
- These molds are designed to hold 45/25/10 pounds of concrete. To ensure accurate product weight, mix extra concrete and pour it level with the top of your mold. You may also measure out the desired weight of concrete by using a bathroom scale.
- Your Purchase Includes:
- (QTY 1) 45lb Olympic Weight Plate Mold
- (QTY 1) 25lb Olympic Weight Plate Mold
- (QTY 1) 10/5lb Olympic Weight Plate Mold
- (QTY 2) Small 1” Plastic Sleeves for 10/5lb molds
- (QTY 10 ) Large 2” Plastic Sleeves for all Caveman mold weights
- (QTY 6) Small Metal Reinforcement Rings for 10/5lb molds
- (QTY 2) Medium Metal Reinforcement Rings for 25lb mold
- (QTY 4) Large Metal Reinforcement Rings for 35/45lb molds
- Product Dimensions:
- 45lb weight plate mold= 17.7” x 2.5”
- 25lb weight plate mold= 13.2” x 2.5”
- 10/5lb weight plate mold= 8.5” x 2.5”
- Items Needed to Complete Your Project
- Mixing Container
- Hot Glue Gun w/ Glue Sticks
- Concrete Premix
INSTRUCTIONS & TIPS
- Place the weight plate mold on a FLAT and LEVEL surface.
- Use hot glue to attach the 2” plastic sleeve to the center of the mold. Position over dimple in center of the mold.
- Mix together concrete and water. Do NOT use Quick-dry Concrete.
- Pour the concrete into the mold. Spread evenly and remove any concrete from the plastic sleeve in the center.
- Add metal reinforcement into middle of your concrete pour.
- Twist weight plate mold back and forth to remove any air bubbles. This will also level the concrete and make certain the weight is distributed evenly throughout your weight.
- Demold after 24-48 hours. For easier removal, spray the inside of your mold with cooking spray prior to pouring concrete.
- Your Caveman Weight is now ready to use!
*IMPORTANT!*
Make certain to add steel reinforcement to your weights! If your weight cracks, the steel will help to keep it together.
TIPS
- Your concrete should be the consistency of “mashed potatoes” when pouring into the molds. Adding additional water makes the concrete flow better, but it makes the concrete weaker and less durable.
- Make certain to pour your concrete level with the top of the mold. This will ensure an accurate weight with your finished project. You may also measure out the correct weight of concrete with a bathroom scale.
- Use hot, soapy water to clean your molds for reuse. Denatured alcohol or Isopropyl will remove hot glue.
- You may paint your Caveman Weights after 5 days. Coating with bedliner or Flex Seal will make your cement weights more rugged and increase durability.
Follow us on Instagram @cavemanweights for more tips and design ideas.
Our weight plate molds are thickerstrongerbeefier. A deeper mold design makes it easier to get accurate weight on your finished product. Our Caveman molds are made from durable ABS plastic and can be reused again and again. Centering Rings are designed to fit 2” or 1” PVC sleeves. These molds are designed to hold 45/25/10 pounds of concrete. To ensure accurate product weight, mix extra concrete and pour it level with the top of your mold. You may also measure out the desired weight of concrete by using a bathroom scale. Your Purchase Includes: (QTY 1) 45lb Olympic Weight Plate Mold (QTY 1) 25lb Olympic Weight Plate Mold (QTY 1) 10/5lb Olympic Weight Plate Mold (QTY 2) Small 1” Plastic Sleeves for 10/5lb molds (QTY 10 ) Large 2” Plastic Sleeves for all Caveman mold weights (QTY 6) Small Metal Reinforcement Rings for 10/5lb molds (QTY 2) Medium Metal Reinforcement Rings for 25lb mold (QTY 4) Large Metal Reinforcement Rings for 35/45lb molds Product Dimensions: 45lb weight plate mold= 17.7” x 2.5” 25lb weight plate mold= 13.2” x 2.5” 10/5lb weight plate mold= 8.5” x 2.5” Items Needed to Complete Your Project Mixing Container Hot Glue Gun w/ Glue Sticks Concrete Premix INSTRUCTIONS & TIPS Place the weight plate mold on a FLAT and LEVEL surface. Use hot glue to attach the 2” plastic sleeve to the center of the mold. Position over dimple in center of the mold. Mix together concrete and water. Do NOT use Quick-dry Concrete. Pour the concrete into the mold. Spread evenly and remove any concrete from the plastic sleeve in the center. Add metal reinforcement into middle of your concrete pour. Twist weight plate mold back and forth to remove any air bubbles. This will also level the concrete and make certain the weight is distributed evenly throughout your weight. Demold after 24-48 hours. For easier removal, spray the inside of your mold with cooking spray prior to pouring concrete. Your Caveman Weight is now ready to use! *IMPORTANT!* Make certain to add steel reinforcement to your weights! If your weight cracks, the steel will help to keep it together. TIPS Your concrete should be the consistency of “mashed potatoes” when pouring into the molds. Adding additional water makes the concrete flow better, but it makes the concrete weaker and less durable. Make certain to pour your concrete level with the top of the mold. This will ensure an accurate weight with your finished project. You may also measure out the correct weight of concrete with a bathroom scale. Use hot, soapy water to clean your molds for reuse. Denatured alcohol or Isopropyl will remove hot glue. You may paint your Caveman Weights after 5 days. Coating with bedliner or Flex Seal will make your cement weights more rugged and increase durability. Follow us on Instagram @cavemanweights for more tips and design ideas.
trusses Archives - Hansen Buildings
Order MEAT N BONE - Miami, FL Menu Delivery [Menu & Prices]
Stix and Stone Make Concrete Weights with the DA Plate Mold
Counterweight Kit, 7129250
Caveman 45lbs rubber coated concrete weight plates
45 Lb Weight Mold
REUSABLE CONCRETE MOLD INCLUDES COLLARS & CONCRETE REINFORCEMENT FIBERS: Use this reusable weight mold to cast many concrete weight plates. Make a
Board Solutions Gravity Barbell Weight Plates Mold - Kit Makes 45lbs 35lbs 25lbs Concrete Plates, Reusable Mold for DIY Standard and Olympic Plates to
Fall 2023 Premier Firearms & Militaria Auction - Day 2 by PoulinAuctions - Issuu
Our weight plate molds are thickerstrongerbeefier., A deeper mold design makes it easier to get accurate weight on your finished product., Our
GEN2 10/5 LBS OLYMPIC PLATE MOLD
AUTUMN 25-45 LB Concrete Cement Weight Plate Mold, Mold for DIY Olympic Barbell Weights, 13 Dia
Dumbbell Set with Rack - 5-25 lb Weights - Centr
Caveman Concrete Olympic Weights - Weight Plates - Bluefield, West Virginia
R-2800: Pratt and Whitney's Dependable Masterpiece (Premiere Series Books) 0768002729, 9780768002720
Recommended for you
-
How to Make Cheap Concrete Weights and Molds!29 May 2024
-
AUTUMN 25-45 LB Concrete Cement Weight Plate Mold, Mold for DIY29 May 2024
-
Dumbbell Mold (40, 60, or 80 lbs) – Rock Weights29 May 2024
-
Precise Molds for Weight Plates For Perfect Product Shaping29 May 2024
-
Three Piece(45LB, 25LB, 10LB) Gorilla Weight Mold Kit – Gorilla29 May 2024
-
Gorilla Weight Mold Kit29 May 2024
-
GEN2 3-MOLD KIT: 45, 25, AND 10/5 LBS29 May 2024
-
Concrete Barbell Workout Coaster 4 Pack / Workout Coaster29 May 2024
-
Weight Plates for sale in Belleville, Ontario29 May 2024
-
SET 6 pcs MOLDS casting CONCRETE WEIGHT PLATES BARBELL DISCS OLYMPIC LIFTING29 May 2024
You may also like
-
HVOMO Pencil Case Large Capacity Pencil Pouch Ukraine29 May 2024
-
Premium Bead, Utility & Tactical folding carpet knife29 May 2024
-
Christmas Children's Christmas Decorative Hand Lamps LED Night Light Home Party Christmas Decoration Girl Party Favors for Kids 8-1229 May 2024
-
Gold Body Chain Necklace, Body Jewelry, Body Chain, Body Chain Jewelry, Body Necklace, Gold Body Chain, Party Costume, Festival Body Chain29 May 2024
-
11pcs Cross Iron On Patches Lot Bulk Wholesale Pack Embroidered For Clothes Designer Mochila Diy Parches Jacket Thermal Naszywka - AliExpress29 May 2024
-
Cinnamon Red Satin Ribbon Flowers, 4 Satin Fabric Flowers, Satin Flowers, Ribbon Flowers, Red Fabric Flowers, Ribbon Flower 35 Colors H29 May 2024
-
What Not to Wear: Commencement Edition…and Other Tips For Your29 May 2024
-
Sulky Water Soluble Paper29 May 2024
-
Matt Green Wrapping Paper, Gift Wrapping Paper,eco Friendly Sustainable Kraft Paper,100% Recycled & Recyclable, Luxury Birthday29 May 2024
-
Caro White Lightening Set, Cosmetics Souq29 May 2024