3D ONE - Cutting Compound & Finishing Polish – 66 Auto Color

Hybrid High-Quality Water-Based Cutting Compound & Finishing Polish. Delivers True Paint Correction and removes heavy scratches.

 

3D ONE Hybrid cutting compound and finishing polish provides rapid results due to nano ceramic alumina abrasives. Achieve professional-level paint scratch correction using either a DA or rotary polisher. This one-of-a-kind product is simple to apply and cleanup, and always yields the ideal finish.

 

HOW-TO:

IMPORTANT: Always work on a clean, cool surface in the shade. Car should already be washed and dried and if needed, use detailing clay first to remove any above surface bonded contaminants.

By orbital polisher

Step 1: Apply 4-5 nickel sized drops of product to the face of the pad.

Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’.

Step 3: Turn polisher to high speed and begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes.

Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE.

Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel. Turn the towel over or fold to a clean side often. For best results, use plenty of clean, dry soft microfiber towels.

By rotary polisher

Step 1: Apply a circle of product around the middle of the face of the pad.

Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’.

Step 3: Using a low to medium speed, begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes.

Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE.

Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel. Turn the towel over or fold to a clean side often. For best results, use plenty of clean, dry soft microfiber towels. Repeat this process to the rest of the vehicle.

 

  3D ONE Hybrid cutting compound and finishing polish provides rapid results due to nano ceramic alumina abrasives. Achieve professional-level paint scratch correction using either a DA or rotary polisher. This one-of-a-kind product is simple to apply and cleanup, and always yields the ideal finish.   HOW-TO: IMPORTANT: Always work on a clean, cool surface in the shade. Car should already be washed and dried and if needed, use detailing clay first to remove any above surface bonded contaminants. By orbital polisher Step 1: Apply 4-5 nickel sized drops of product to the face of the pad. Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’. Step 3: Turn polisher to high speed and begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes. Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE. Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel. Turn the towel over or fold to a clean side often. For best results, use plenty of clean, dry soft microfiber towels. By rotary polisher Step 1: Apply a circle of product around the middle of the face of the pad. Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’. Step 3: Using a low to medium speed, begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes. Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE. Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel. Turn the towel over or fold to a clean side often. For best results, use plenty of clean, dry soft microfiber towels. Repeat this process to the rest of the vehicle.  

3D AAT 501+502 Combo 32oz Kit Perfect 2-Step Cut+Finish Polish – 3D Car Care Miami

3D Car Care - ONE - 400 Hybrid Cutting Compound & Finishing Polish - 473ml 16oz 606663053706

3D One Hybrid Compound & Polish 16oz

3D One Car Scratch & Swirl Remover - Rubbing Compound & Finishing Polish - Buffing Compound Swirl Remover - True Car Paint Correction 16oz. : Automotive

3D I-Cut One Step Compound/ Polish review and How-To.

Best 32oz/1 L 3D ONE Hybrid Cutting Rubbing Compound & Finishing Polish-Low Dust

Review: 3D Paint Coating and 3D One Cutting Compound and Finishing Polish

The 3D One is a hybrid compound and polish, which allows you to remove heavy imperfections while finishing the paint to a brilliant shine! When using a compound, generally speaking, you will be left with a little bit of haze on the surface that requires a second polishing step to remove. 3D specially formulated One with a water-based formula packed with Nano Ceramic Alumina Abrasives to minimize hazing.

3D One - Hybrid Compound & Polish 32 oz

The Best One Step Car Compound/Polish 3D One vs Sonax Cut & Finish vs Scholl Concepts S20 Black

3D ONE Hybrid cutting compound and finishing polish provides rapid results due to nano ceramic alumina abrasives. Achieve professional-level paint

3D - ONE - Cutting Compound & Finishing Polish

The 3D One is a hybrid compound and polish, which allows you to remove heavy imperfections while finishing the paint to a brilliant shine! When using a compound, generally speaking, you will be left with a little bit of haze on the surface that requires a second polishing step to remove. 3D specially formulated One with a water-based formula packed with Nano Ceramic Alumina Abrasives to minimize hazing.

3D One - Hybrid Compound & Polish 32 oz

3D AAT 501 Cutting Compound - 32oz - Step 1 Body Shop Cutting Compound - Fastest Leveler - Cuts P1000 or Finer - Low Dust, Easy Clean Up, True Paint Correction - Adaptive Abrasive Technology : Automotive