Brass, 32P, 20 Tooth, D15T Spline Servo Gear - ServoCity

This 20 tooth servo gear has a 15 tooth servo spline found on numerous Hitec Large Size (aka Giant Scale) servos. The splined hole allows this servo gear to fit snugly onto the splined output shaft of your servo. The stock servo screw will pull the gear in place so that it bottoms out on the top of the spline, ensuring the gear will run true. Given the repeating hole pattern of Actobotics Channel, this gear is most commonly mated to an 76 tooth hub gear spaced 1.5” apart to create a 3.8 reduction between the servo gear and the driven gear. Patented. 20° Pressure AngleWidth = 1/4” (.250”)

ServoCity, Actobotics

20 Tooth Servo Gear, 4305?0025?0020 MOD 0.8 Brass Gear Industrial Supplies Parts : Toys & Games

This 15 tooth servo gear is most commonly used to drive the 105 tooth hub gear, spaced 48mm away, in order to create a 7:1 ratio. This gear reduction

2305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 15 Tooth)

1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) - ServoCity

Brass, 32P, 20 Tooth, D15T Spline Servo Gear - ServoCity

12 Tooth 32 DP Servo Spline Bore Brass Gear - AndyMark, Inc

1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) - ServoCity

This 15 tooth servo gear is most commonly used to drive the 105 tooth hub gear, spaced 48mm away, in order to create a 7:1 ratio. This gear reduction

2305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 15 Tooth)

This 32 tooth servo gear has a 24 tooth servo spline which is common within Hitec standard size servos. The splined hole allows this servo gear to fit

Brass, 32P, 32 Tooth, C24T Spline Servo Gear

ServoCity, Actobotics

20 Tooth Press Fit Sprocket (0.1227 Pitch, 0.250 Bore) - ServoCity