3/8 Hex AutoLock™ Screw Driver – New Revolution Tools

Drive standard 3/8" hex washer head screws like #14 self drilling tek screws with total confidence using the AutoLock™ driver. This driver locks onto a screw to eliminate dropping and bucking screws sideways for greater productivity. Unlike magnetic nut drivers, there are no magnets to attract metal shavings and debris.  Operation: Hold a screw near the tip and push it into the driver. The driver triggers forward to lock in the screw. Drive the screw all the way in. The head is automatically released ~1/2" before full install. Repeat Features: Patented design easily locks onto screws when loading and self releases during installation. Heat treated alloy steel for long life. 1/4" hex quick change shank.  Floating neo-bonded washers will not interfere with tool operation as long as there is a 1/4" gap between the washer and screw head. Largest diameter of tool is 1-1/8". 3/4" recommended minimum screw
Drive standard 3/8 hex washer head screws like #14 self drilling tek screws with total confidence using the AutoLock™ driver. This driver locks onto a screw to eliminate dropping and bucking screws sideways for greater productivity. Unlike magnetic nut drivers, there are no magnets to attract metal shavings and debris.  Operation: Hold a screw near the tip and push it into the driver. The driver triggers forward to lock in the screw. Drive the screw all the way in. The head is automatically released ~1/2 before full install. Repeat Features: Patented design easily locks onto screws when loading and self releases during installation. Heat treated alloy steel for long life. 1/4 hex quick change shank.  Floating neo-bonded washers will not interfere with tool operation as long as there is a 1/4 gap between the washer and screw head. Largest diameter of tool is 1-1/8. 3/4 recommended minimum screw length. Since AutoLock™ drivers lock around the screw head, non-standard screws with washer head diameters greater than 17/32 are not compatible with this driver. Looking to drive a different type of screw? Send us a message through our About Us page.

TEKTON 5/64 in. to 3/8 in. Hex Screwdriver Set (11-Pieces

Gunsmithing Screwdrivers Sets & Torque Wrenches

Wheeler 55 Piece SAE/Metric Hex and Torx Screwdriver

Hex Screwdriver - Eddy Floor Tools

TEKTON 3/16 Inch Hex High-Torque Black Oxide Blade Screwdriver

TEKTON 5/64 in. to 3/8 in. Hex Screwdriver Set (11-Pieces

3/8 Inch Hex High-Torque Black Oxide Blade Screwdriver

Stryker 3.5 mm Hex Self-Holding Screwdriver, Long

Youniker screwdrivers come with a 4.5mm security screwdriver, a 3.8mm security screwdriver High Quality: Youniker 4.5mm and 3.8mm security bit set is

Youniker Screwdriver Set, 3.8mm and 4.5mm Security Screwdriver Bit Screwdriver Tools Compatible with 64 NES SNES N64

Gunsmithing Screwdrivers Sets & Torque Wrenches

Gamebit Security Screwdriver, Double-Ended 4.5mm 3.8mm Gamebit Screwdriver Bit Set Replacement,Gamebit Security Screwdriver Kit Compatible with NES