PC-Marine - 2oz - Putty Epoxies – Western Log Home Supply

By A Mystery Man Writer

Last updated 04 Jun 2024

PC-Marine - 2oz - Putty Epoxies – Western Log Home Supply

PC-Marine - 2oz Putty Epoxies Download PC-Marine MSDS Description: PC-Marine is a hand moldable putty epoxy designed for quick emergency-type
Buy quality log home supplies online from Western Log Home Supply. We carry log cabin supplies including chinking, caulking, and wood stain finishes. Find log home care and maintenance supplies online from Western Log Home Supply.
Download PC-Marine™ MSDSDescription: PC-Marine™ is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Marine™ is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. Cut, mix and apply. PC-Marine™ allows a working time of about 15 minutes and cures for service in 60 minutes. Repair: Holes in Fiberglass, PVC, Boats, Spas, Swimming Pools and more. ***Note: PC-Marine™ will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt.Mixing: Cut or twist off desired amount of epoxy. Mix by kneading putty with fingers until a uniform color is achieved. For ease of mixing warm putty to room temperature or above. Powder on hands (corn starch, baby powder) is helpful to minimize sticky epoxy contact before hardening begins.*** Note: Use latex gloves to avoid any issues.Tips: For best results, surface should be cleaned and free of rust, dust, and oil. Solvents such as denatured alcohol can be used to remove most contaminants. Whenever possible, lightly sand or rough up the surface to improve adhesion. For a smooth, finished surface, hand rub with wet finger or cloth prior to cure. Denatured alcohol is excellent for smoothing, shaping, and forming of putty epoxy. PC Marine™ cures well even at cold temperatures (40°F). PC Marine™ is supplied in premeasured sticks. The texture of the putty is such that it is slightly tacky but does not stick aggressively to fingers. The putty holds its shape well and can be used in vertical and overhead applications.Packaging: Wrapped in Polyethylene film and protected on the ends with aluminum labels, the stick is doubly protected in an air tight clear plastic cylinder. The remaining portion of unused putty can be saved by placing the aluminum labels on the exposed end and put back into the cylinder.

PC-Lumber™ – Protective Coating Company

Marine Epoxy Putty

System Three Epoxy — Noah's Marine

PC Products PC-Marine Multiple Colors/Finishes Epoxy Adhesive at

PC Products PC-Marine Epoxy Putty, 2oz Stick, White (25567): Hardware Sealers: : Industrial & Scientific

PC Products PC-Woody Wood Repair Epoxy Paste, Two-Part 12 oz in Two Cans, Tan: Epoxy Adhesives: : Tools & Home Improvement

PC Products 4 oz. PC-Pool Putty Epoxy 041116 - The Home Depot

PC-Marine is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Marine is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. Cut, mix and apply. PC-Marine allows a working time of about 15 minutes and cures for service in 60 minutes. PC-Marine will not bond to wax paper, Teflon, polyethylene, and some other plastics. There are hundreds of uses in thousands of combination.