2-1/2 inch, 3 inch, 3-1/2 inch, 4 inch Conduit Punch and Die Set

By A Mystery Man Writer

Last updated 12 May 2024

2-1/2 inch, 3 inch, 3-1/2 inch, 4 inch Conduit Punch and Die Set

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means, for example, a 1" punch die will correctly punch for a 1" conduit tube (which has an actual hole size of roughly 1.33"). We've provided you with a handy table below that shows the actual hole size produced by our punch die/conduit sizes in this set.

Pipe Notcher Housing for 2-5/8 inch to 3-1/2 inch OD Tooling

Tools - Page 2 - TEMCo Industrial

TEMCo THA113 2-1/2 Deep Draw Conduit Punch - Die for Hydraulic

Gardner Bender Slug-Out Knockout Set for 2-1/2 inch (6.35 cm

The M18 Force Logic 6 Ton Knockout Tool carries these benefits forward to service applications. It is powerful enough to punch up to 4 holes in 14 Gauge mild steel and 40% lighter weight. The EXACT punches and dies are rated for both mild and stainless steel punching.

Milwaukee 2677-21 M18 Force Logic 6T Knockout Tool Kit

Greenlee 7304 Standard Round Knockout Punch Kit 2-1/2 - 4-Inch

2-1/2 inch, 3 inch, 3-1/2 inch, 4 inch Conduit Punch and Die Set for Knockout - TEMCo Industrial

Gardner Bender Slug-Out Knockout Set for 2-1/2 inch (6.35 cm

Fast, easy and simple to operate. Compact design for field use on construction sites and maintenance jobs. Punches 10 times faster than wrench method. Will also drive 751 cable cutter head. Can be used with most standard round Slug-Buster and Slug-Splitter SC punches (not 1/2, 9/16, 5/8 inch). Can be used with non-round punches (adapter may be required). 3 ft hose powerful 11-ton hydraulic ram.